SN74ACT1071_14 Datasheet, PDF (1/11 Pages) Texas Instruments – 10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

• Designed to Ensure Defined Voltage Levels
on Floating Bus Lines in CMOS Systems
• Reduces Undershoot and Overshoot
Caused By Line Reflections
• Repetitive Peak Forward
Current . . . I_FRM = 100 mA
• Inputs Are TTL-Voltage Compatible
• Low Power Consumption (Like CMOS)
• ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015; Exceeds
200 V Using Machine Model
(C = 200 pF, R = 0)
• Center-Pin V_CC and GND Configuration
Minimizes High-Speed Switching Noise
SN74ACT1071
10-BIT BUS-TERMINATION ARRAY
WITH BUS-HOLD FUNCTION
SCAS192 – D3994, MARCH 1992 – REVISED APRIL 1993
D PACKAGE
(TOP VIEW)
D1 1
D2 2
GND 3
GND 4
D3 5
D4 6
D5 7
14 D10
13 D9
12 D8
11 V_CC
10 V_CC
9 D7
8 D6
description
This device is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp
the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device
also contains a bus-hold function that consists of a CMOS-buffer stage with a high-resistance feedback path
between its output and its input. The SN74ACT1071 prevents bus lines from floating without using pullup or
pulldown resistors.
The high-impedance inputs of these internal buffers are connected to the input terminals of the device. The
feedback path on each internal buffer stage keeps a bus line tied to the bus holder at the last valid logic state
generated by an active driver before the bus switches to the high-impedance state.
The SN74ACT1071 is characterized for operation from – 40°C to 85°C.
logic diagram, one of ten channels (positive logic)
D1 ¹
VCC ¹¹
VCC ¹⁰
TG
GND ³
4
GND
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1993, Texas Instruments Incorporated
4–1