SN74ABT125Q-Q1 Datasheet, PDF (1/8 Pages) Texas Instruments – QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS

D Qualified for Automotive Applications
D Typical V_OLP (Output Ground Bounce)
<1 V at V_CC = 5 V, T_A = 25°C
D High-Drive Outputs
(−16-mA I_OH, 32-mA I_OL)
D I_off and Power-Up 3-State Support Hot
Insertion
D Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17
D ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
SN74ABT125Q-Q1
QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
SCAS686B − DECEMBER 2002 − REVISED JANUARY 2008
D PACKAGE
(TOP VIEW)
1OE 1
1A 2
1Y 3
2OE 4
2A 5
2Y 6
GND 7
14 V_CC
13 4OE
12 4A
11 4Y
10 3OE
9 3A
8 3Y
description/ordering information
The SN74ABT125Q-Q1 quadruple bus buffer gate features independent line drivers with 3-state outputs. Each
output is disabled when the associated output-enable (OE) input is high.
This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry
disables the outputs, preventing damaging current backflow through the device when it is powered down. The
power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,
which prevents driver conflict.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION^†
T_A
PACKAGE^‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
−40°C to 125°C SOIC − D
Tape and reel SN74ABT125QDRQ1 ABT125Q
† _{For the most current package and ordering information, see the Package Option Addendum at the end}
of this document, or see the TI web site at www.ti.com.
‡ _{Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.}
FUNCTION TABLE
(each buffer)
INPUTS
OE
A
OUTPUT
Y
L
H
H
L
L
L
H
X
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2008, Texas Instruments Incorporated
1