SN65LVPE502CP_12 Datasheet, PDF (1/29 Pages) Texas Instruments – Dual Channel USB3.0 Redriver/Equalizer

SN65LVPE502CP
www.ti.com
SLLSE79B – MARCH 2011 – REVISED FEBRUARY 2012
Dual Channel USB3.0 Redriver/Equalizer
Check for Samples: SN65LVPE502CP
FEATURES
1
• Single Lane USB 3.0 Equalizer/Redriver
• Selectable Equalization, De-Emphasis and
Output Swing Control
• Integrated Termination
• Hot-Plug Capable
• Low Active Power (U0 state)
– 315 mW (TYP), V_CC = 3.3V
• USB 3.0 Low Power Support
– 7 mW (TYP) When no Connection Detected
– 70 mW (TYP) When Link in U2/U3 Mode
• Excellent Jitter and Loss Compensation
Capability:
– >40" of Total 4 mil Stripline on FR4
• Small Foot Print – 24 Pin (4mm x 4mm) QFN
Package
• High Protection Against ESD Transient
– HBM: 5,000 V
– CDM: 1,500 V
– MM: 200 V
APPLICATIONS
• Notebooks, Desktops, Docking Stations,
Active Cable, Backplane and Active Cable
DESCRIPTION
The SN65LVPE502CP is a dual channel, single lane
USB 3.0 redriver and signal conditioner supporting
data rates of 5.0Gbps. The device complies with USB
3.0 spec revision 1.0, supporting electrical idle
condition and low frequency periodic signals (LFPS)
for USB 3.0 power management modes.
SPACER
USB Host
Main PCB
Redriver
USB
Connector
USB Host
Main PCB
Redriver
20"
Connector
Device PCB
Device
3m USB
20"
3.0 Cable
1"-6"
Figure 1. Typical Application
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated