SN65LVPE502A_17 Datasheet, PDF (1/36 Pages) Texas Instruments – Dual-Channel USB 3.0 Redriver and Equalizer

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
SN65LVPE502A, SN65LVPE502B
SLLSEB3C – MARCH 2012 – REVISED NOVEMBER 2016
SN65LVPE502x Dual-Channel USB 3.0 Redriver and Equalizer
1 Features
•1 Single-Lane USB 3.0 Redriver and Equalizer
• Selectable Equalization, De-Emphasis and Output
Swing Control
• Integrated Termination
• Hot-Plug Capable
• Low Active Power (U0 state):
– 315 mW (Typical), V_CC = 3.3 V
• USB 3.0 Low Power Support:
– 7 mW (Typical) When No Connection Detected
– 70 mW (Typical) When Link in U2/U3 Mode
• Excellent Jitter and Loss Compensation
Capability:
– >40 in of Total 4 mil Stripline on FR4
• Small Footprint, 3 mm × 3 mm and 4 mm × 4 mm,
24-Pin VQFN Packages
• High Protection Against ESD Transient:
– HBM: 5,000 V
– CDM: 1,500 V
– MM: 200 V
2 Applications
• Notebooks
• Desktops
• Docking Stations
• Backplanes
• Active Cables
3 Description
The SN65LVPE502x devices are dual-channel,
single-lane USB 3.0 redriver and signal conditioners
supporting data rates of 5 Gbps. The devices comply
with USB 3.0 specification revision 1.0 supporting
electrical idle condition and low frequency periodic
signals (LFPS) for USB 3.0 power management
modes.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SN65LVPE502A
RLL (24)
3.00 mm × 3.00 mm
SN65LVPE502A,
SN65LVPE502B
RGE (24)
4.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application
USB Host
Main PCB
Redriver
USB
Connector
USB Host
Main PCB
Redriver
20"
Connector
Device PCB
Device
3m USB
20"
3.0 Cable
1"-6"
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.