SN65LVDS180-Q1 Datasheet, PDF (1/29 Pages) Texas Instruments – HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS

www.ti.com
SN65LVDS180-Q1
SN65LVDS050-Q1
SN65LVDS051-Q1
SGLS204C – SEPTEMBER 2003 – REVISED MARCH 2013
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS
Check for Samples: SN65LVDS180-Q1, SN65LVDS050-Q1, SN65LVDS051-Q1
FEATURES
1
• Qualified for Automotive Applications
• ESD Protection Exceeds 2000 V Per MIL-STD-
883, Method 3015; Exceeds 200 V Using
Machine Model (C = 200 pF, R = 0)
• Meets or Exceeds the Requirements of ANSI
TIA/EIA-644-1995 Standard
• Signaling Rates up to 400 Mbps
• Bus-Terminal ESD Exceeds 12 kV
• Operates From a Single 3.3-V Supply
• Low-Voltage Differential Signaling With Typical
Output Voltages of 350 mV and a 100-Ω Load
• Propagation Delay Times
– Driver: 1.7 ns Typ
– Receiver: 3.7 ns Typ
• Power Dissipation at 200 MHz
– Driver: 25 mW Typical
– Receiver: 60 mW Typical
• LVTTL Input Levels Are 5-V Tolerant
• Receiver Maintains High Input Impedance With
V_CC < 1.5 V
• Receiver Has Open-Circuit Fail Safe
DESCRIPTION
The SN65LVDS180, SN65LVDS050, and
SN65LVDS051 are differential line drivers and
receivers that use low-voltage differential signaling
(LVDS) to achieve signaling rates as high as 400
Mbps. The TIA/EIA-644 standard compliant electrical
interface provides a minimum differential output
voltage magnitude of 247 mV into a 100-Ω load and
receipt of 50-mV signals with up to 1 V of ground
potential difference between a transmitter and
receiver.
The intended application of this device and signaling
technique is for point-to-point baseband data
transmission over controlled impedance media of
approximately 100-Ω characteristic impedance. The
transmission media may be printed-circuit board
traces, backplanes, or cables. (Note: The ultimate
rate and distance of data transfer is dependent upon
the attenuation characteristics of the media, the noise
coupling to the environment, and other application
specific characteristics).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated