SN65HVD82 Datasheet, PDF (1/23 Pages) Texas Instruments – Robust RS-485 Transceiver

SN65HVD82
www.ti.com
Robust RS-485 Transceiver
Check for Samples: SN65HVD82
FEATURES
1
• Bus I/O Protection
– ±16 kV HBM protection
– ±12 kV IEC61000-4-2 Contact Discharge
– +4kV IEC61000-4-4 Fast Transient Burst
• Industrial Temperature Range –40°C to 85°C
• Large Receiver Hysteresis (60mV typ) for
Noise Rejection
• Low Power Consumption
– <1 µA Standby Current
– <1 mA Quiescent Current
• Signaling Rate Optimized for 250 kbps
APPLICATIONS
• Electrical Meters
• Building Automation
• Industrial Networks
• Security Electronics
SLLSED6 – OCTOBER 2012
DESCRIPTION
This device has robust drivers and receivers for demanding industrial applications. The bus pins are robust to
ESD events, with high levels of protection to Human-Body Model, Air-Gap Discharge, and Contact Discharge
specifications.
The device combines a differential driver and a differential receiver, which operate from a single 5V power
supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus
port suitable for half-duplex (two-wire bus) communication. The device features a wide common-mode voltage
range making the device suitable for multi-point applications over long cable runs. The device is characterized
from –40°C to 85°C.
(Top View)
Logic Diagram (Positive Logic)
R
1
RE
2
DE
3
D
4
8
V_CC
7B
6A
5 GND
R1
RE ²
3
DE
D4
6A
7
B
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated