SN65HVD230M-EP Datasheet, PDF (1/31 Pages) Texas Instruments – 3.3-V CAN TRANSCEIVERS

SN65HVD230MĆEP
3.3ĆV CAN TRANSCEIVERS
SGLS356 − MAY 2006
FEATURES
D Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of −55°C
to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree^†
D Operates With a 3.3-V Supply
D Low Power Replacement for the PCA82C250
Footprint
D Bus/Pin ESD Protection Exceeds 15-kV HBM
D Controlled Driver Output Transition Times for
Improved Signal Quality on the
SN65HVD230M
D Unpowered Node Does Not Disturb the Bus
D Compatible With the Requirements of the
ISO 11898 Standard
D Low-Current SN65HVD230M Standby Mode
370 µA Typical
D Designed for Signaling Rates^‡ Up To
1 Megabit/Second (Mbps)
D Thermal Shutdown Protection
D Open-Circuit Fail-Safe Design
† _{Component qualification in accordance with JEDEC and industry}
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature cycle,
autoclave or unbiased HAST, electromigration, bond intermetallic
life, and mold compound life. Such qualification testing should not
be viewed as justifying use of this component beyond specified
performance and environmental limits.
SN65HVD230MD
(TOP VIEW)
D
1
8
R_S
GND
2
7
CANH
V_CC
3
6
CANL
R
4
5
V_ref
logic diagram (positive logic)
SN65HVD230M
Logic Diagram (Positive Logic)
3
VCC
5 _Vref
D1
RS ⁸
R4
7 _CANH
6 _CANL
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
‡ _{The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).}
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright  2006, Texas Instruments Incorporated
1