SN55LBC173-DIE Datasheet, PDF (1/5 Pages) Texas Instruments – QUADRUPLE LOW-POWER DIFFERENTIAL RECEIVER

SN55LBC173-DIE
www.ti.com
SGLS413 – JUNE 2013
QUADRUPLE LOW-POWER DIFFERENTIAL RECEIVER
Check for Samples: SN55LBC173-DIE
FEATURES
1
•2 Meets EIA Standards RS-422-A, RS-423-A,
RS-485, and CCITT V.11
• Designed to Operate With Pulse Durations
• Designed for Multipoint Bus Transmission on
Long Bus Lines in Noisy Environments
• Low-Power Consumption
• Open-Circuit Fail-Safe Design
DESCRIPTION
The SN55LBC173-DIE is a monolithic quadruple differential line receiver with 3-state outputs designed to meet
the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized
for balanced multipoint bus transmission at data rates. The four receivers share two ORed enable inputs, one
active when high, the other active when low. Each receiver features high input impedance, input hysteresis for
increased noise immunity. Fail-safe design ensures that if the inputs are open circuited, the output is always
high. The SN55LBC173-DIE is designed using the Texas Instruments proprietary LinBiCMOSE™ technology that
provides low power consumption, high switching speeds, and robustness.
PRODUCT
SN55LBC173
PACKAGE
DESIGNATOR
TD
ORDERING INFORMATION⁽¹⁾
PACKAGE
ORDERABLE PART NUMBER PACKAGE QUANTITY
Bare die in waffle pack⁽²⁾
SN55LBC173TDA1
100
SN55LBC173TDA2
10
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinBiCMOSE is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated