SN55116_13 Datasheet, PDF (1/15 Pages) Texas Instruments – DIFFERENTIAL LINE TRANSCEIVERS

SN55116
DIFFERENTIAL LINE TRANSCEIVERS
SGLS319 − NOVEMBER 2005
Features
D Single 5-V Supply
D 3-State Driver Output Circuitry
D TTL-Compatible Driver Inputs
D TTL-Compatible Receiver Output
D Differential Line Operation
D Receiver Output Strobe
D Designed for Party-Line (Data-Bus)
Applications
description
D Independent Driver and Receiver
D Choice of Open-Collector or Totem-Pole
Outputs on Both Driver and Receiver
D Dual Data Inputs on Driver
D Optional Line-Termination Resistor in
Receiver
D ±15-V Receiver Common-Mode Capability
D Receiver Frequency-Response Control
This integrated circuit is designed for use in interfacing between TTL-type digital systems and differential
data-transmission lines. It is especially useful for party-line (data-bus) applications. This circuit type combines
in one package a 3-state differential line driver and a differential-input line receiver, both of which operate from
a single 5-V power supply. The driver inputs and the receiver outputs are TTL compatible. The driver employed
is similar to the SN55113 and SN75113 3-state line drivers and the receiver is similar to the SN55115 and
SN75115 line receivers.
The SN55116 offers all the features of the SN55113 and SN75113 drivers and the SN55115 and SN75115
receivers combined. The driver performs the dual input AND and NAND functions when enabled or presents
a high impedance to the load when in the disabled state. The driver output stages are similar to TTL totem-pole
outputs, but have the current-sinking portion separated from the current-sourcing portion and both are brought
out to adjacent package terminals. This feature allows the user the option of using the driver in the open-collector
output configuration or, by connecting the adjacent source and sink terminals together, using the driver in the
normal totem-pole output configuration.
The receiver portion of the SN55116 features a differential-input circuit having a common-mode voltage range
of ±15 V. An internal 130-Ω equivalent resistor also is provided, which optionally can be used to terminate the
transmission line. A frequency-response control terminal allows the user to reduce the speed of the receiver
or to improve differential noise immunity. The receiver of the SN55116 has an output strobe and a split
totem-pole output. The receiver section of the circuit is independent of the driver section, except for the V_CC
and ground terminals.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2005, Texas Instruments Incorporated
On products compliant to MILĆPRFĆ38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1