|
SN54HC245_16 Datasheet, PDF (1/29 Pages) Texas Instruments – Octal Bus Transceivers With 3-State Outputs | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
SN54HC245, SN74HC245
SCLS131E â DECEMBER 1982 â REVISED SEPTEMBER 2015
SNx4HC245 Octal Bus Transceivers With 3-State Outputs
1 Features
â¢1 Wide Operating Voltage Range of 2 V to 6 V
⢠High-Current 3-State Outputs Drive Bus Lines
Directly or Up to 15 LSTTL Loads
⢠Low Power Consumption, 80-μA Max ICC
⢠Typical tpd = 12 ns
⢠±6-mA Output Drive at 5 V
⢠Low Input Current of 1 μA Max
⢠On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include Testing
of All Parameters.
2 Applications
⢠Servers
⢠PCs and Notebooks
⢠Network Switches
⢠Wearable Health and Fitness Devices
⢠Telecom Infrastructures
⢠Electronic Points of Sale
3 Description
These octal bus transceivers are designed for
asynchronous two-way communication between data
buses. The control-function implementation minimizes
external timing requirements.
The devices allow data transmission from the A bus
to the B bus or from the B bus to the A bus,
depending on the logic level at the direction-control
(DIR) input. The output-enable (OE) input can be
used to disable the device so that the buses are
effectively isolated.
PART NUMBER
SNx4HC245
Device Information
PACKAGE
BODY SIZE (NOM)
SSOP (20)
7.20 mm à 5.30 mm
SOIC (20)
12.80 mm à 7.50 mm
PDIP (20)
24.33 mm à 6.35 mm
SOP (20)
12.60 mm à 5.30 mm
TSSOP (20)
6.50 mm à 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram (Positive Logic)
1
DIR
19
OE
A1 2
18
B1
To Seven Other Channels
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |