|
SN54HC164_16 Datasheet, PDF (1/33 Pages) Texas Instruments – 8-Bit Parallel-Out Serial Shift Registers | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
SN54HC164, SN74HC164
SCLS115G â DECEMBER 1982 â REVISED SEPTEMBER 2015
SNx4HC164 8-Bit Parallel-Out Serial Shift Registers
1 Features
â¢1 Wide Operating Voltage Range of 2 V to 6 V
⢠Outputs Can Drive Up to 10 LSTTL Loads
⢠Low Power Consumption, 80-μA Maximum ICC
⢠Typical tpd = 20 ns
⢠±4-mA Output Drive at 5 V
⢠Low Input Current of 1-μA Maximum
⢠AND-Gated (Enable/Disable) Serial Inputs
⢠Fully Buffered Clock and Serial Inputs
⢠Direct Clear
⢠On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include Testing
of All Parameters.
2 Applications
⢠Programable Logic Controllers
⢠Appliances
⢠Video Display Systems
⢠Output Expander
3 Description
These 8-bit shift registers feature AND-gated serial
inputs and an asynchronous clear (CLR) input. The
gated serial (A and B) inputs permit complete control
over incoming data; a low at either input inhibits entry
of the new data and resets the first flip-flop to the low
level at the next clock (CLK) pulse. A high-level input
enables the other input, which then determines the
state of the first flip-flop. Data at the serial inputs can
be changed while CLK is high or low, provided the
minimum set-up time requirements are met. Clocking
occurs on the low-to-high-level transition of CLK.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOIC (14)
8.65 mm à 3.91 mm
SN74HC164
PDIP (14)
SO (14)
19.30 mm à 6.35 mm
10.30 mm à 5.30 mm
TSSOP (14)
5.00 mm à 4.40 mm
CDIP (14)
19.94 mm à 6.92 mm
SN54HC164
CFP (14)
9.21 mm à 6.29 mm
LCCC (14)
9.39 mm à 9.39 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram (Positive Logic)
8
CLK
1
A
2
B
C1
1D
R
C1
1D
R
C1
1D
R
9
CLR
3
4
5
QA
QB
QC
Pin numbers shown are for the D, J, N, NS, PW, and W packages.
C1
1D
R
6
QD
C1
1D
R
10
QE
C1
1D
R
11
QF
C1
1D
R
12
QG
C1
1D
R
13
QH
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |