SN54ALS996_15 Datasheet, PDF (1/17 Pages) Texas Instruments – 8-BIT D-TYPE EDGE-TRIGGERED READ-BACK LATCHES

SN54ALS996, SN74ALS996
8ĆBIT DĆTYPE EDGEĆTRIGGERED READĆBACK LATCHES
ą
SDAS098B − OCTOBER 1984 − REVISED JANUARY 1995
• 3-State I/O-Type Read-Back Inputs
• Bus-Structured Pinout
• T/C Determines True or Complementary
Data at Q Outputs
• Package Options Include Plastic
Small-Outline (DW) Packages, Ceramic
Chip Carriers (FK), and Standard Plastic
(NT) and Ceramic (JT) 300-mil DIPs
description
These 8-bit latches are designed specifically for
storing the contents of the input data bus and
providing the capability of reading back the stored
data onto the input data bus. The Q outputs are
designed with bus-driving capability.
SN54ALS996 . . . JT PACKAGE
SN74ALS996 . . . DW OR NT PACKAGE
(TOP VIEW)
1D 1
2D 2
3D 3
4D 4
5D 5
6D 6
7D 7
8D 8
EN 9
RD 10
CLK 11
GND 12
24 V_CC
23 1Q
22 2Q
21 3Q
20 4Q
19 5Q
18 6Q
17 7Q
16 8Q
15 OE
14 T/C
13 CLR
The edge-triggered flip-flops enter the data on the
low-to-high transition of the clock (CLK) input
when the enable (EN) input is low. Data can be
read back onto the data inputs by taking the read
(RD) input low, in addition to having EN low. When
EN is high, both the read-back and write modes
are disabled. Transitions on EN should only be
made with CLK high to prevent false clocking.
The polarity of the Q outputs can be controlled by
the polarity (T/C) input. When T/C is high, Q is the
same as is stored in the flip-flops. When T/C is low,
the output data is inverted. The Q outputs can be
placed in the high-impedance state by taking the
output-enable (OE) input high. OE does not affect
the internal operation of the register. Old data can
be retained or new data can be entered while the
outputs are off.
A low level at the clear (CLR) input resets the
internal registers low. The clear function is
asynchronous and overrides all other register
functions.
SN54ALS996 . . . FK PACKAGE
(TOP VIEW)
4 3 2 1 28 27 26
4D 5
25 3Q
5D 6
24 4Q
6D 7
23 5Q
NC 8
22 NC
7D ₉
21 6Q
8D ₁₀
20 7Q
EN ₁₁
19 8Q
12 13 14 15 16 17 18
NC − No internal connection
The -1 version of the SN74ALS996 is identical to the standard version, except that the recommended maximum
I_OL for the -1 version is increased to 48 mA. There is no -1 version of the SN54ALS996.
The SN54ALS996 is characterized for operation over the full military temperature range of −55°C to 125°C. The
SN74ALS996 is characterized for operation from 0°C to 70°C.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
2−1