SN54AC14-SP Datasheet, PDF (1/9 Pages) Texas Instruments – RAD-TOLERANT CLASS V, HEX SCHMITT-TRIGGER INVERTER

SN54AC14-SP
www.ti.com
SCAS860B – OCTOBER 2008 – REVISED MARCH 2012
RAD-TOLERANT CLASS V, HEX SCHMITT-TRIGGER INVERTER
Check for Samples: SN54AC14-SP
FEATURES
1
• 2-V to 6-V V_CC Operation
• Inputs Accept Voltages to 6 V
• Max tpd of 9.5 ns at 5 V
• Rad-Tolerant: 50 kRad(Si) TID ⁽¹⁾
– TID Dose Rate < 2mRad/sec
• QML-V Qualified, SMD 5962-87624
(1) Radiation tolerance is a typical value based upon initial device
qualification. Radiation Lot Acceptance Testing is available -
contact factory for details.
J OR W PACKAGE
(TOP VIEW)
1A 1
1Y 2
2A 3
2Y 4
3A 5
3Y 6
GND 7
14 V_CC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
DESCRIPTION/ORDERING INFORMATION
These Schmitt-trigger devices contain six independent inverters. They perform the Boolean function Y = A.
Because of the Schmitt action, they have different input threshold levels for positive-going (V_T+) and for negative-
going (V_T–) signals.
These circuits are temperature compensated and can be triggered from the slowest of input ramps and still give
clean, jitter-free output signals. They also have a greater noise margin than conventional inverters.
T_A
–55°C to 125°C
CDIP – J
CFP – W
ORDERING INFORMATION⁽¹⁾
PACKAGE ⁽²⁾
ORDERABLE PART NUMBER
Tube
5962-8762402VCA
Tube
5962-8762402VDA
TOP-SIDE MARKING
5962-8762402VCA
5962-8762402VDA
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
FUNCTION TABLE
(EACH INVERTER)
INPUT
A
OUTPUT
Y
H
L
L
H
LOGIC DIAGRAM, EACH INVERTER (POSITIVE LOGIC)
A
Y
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2012, Texas Instruments Incorporated