SN54ABTH16244_14 Datasheet, PDF (1/14 Pages) Texas Instruments – 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

D Members of the Texas Instruments
Widebus™ Family
D State-of-the-Art EPIC-ΙΙB™ BiCMOS Design
Significantly Reduces Power Dissipation
D Latch-Up Performance Exceeds 500 mA Per
JESD 17
D Typical V_OLP (Output Ground Bounce)
<1 V at V_CC = 5 V, T_A = 25°C
D Distributed V_CC and GND Pins Minimize
High-Speed Switching Noise
D Flow-Through Architecture Optimizes PCB
Layout
D High-Drive Outputs (–32-mA I_OH, 64-mA I_OL)
D Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Package Options Include Plastic Shrink
Small-Outline (DL), Thin Shrink
Small-Outline (DGG), Thin Very
Small-Outline (DGV) Packages, and 380-mil
Fine-Pitch Ceramic Flat (WD) Packages
description
SN54ABTH16244, SN74ABTH16244
16-BIT BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS677D – SEPTEMBER 1996 – REVISED MARCH 2000
SN54ABTH16244 . . . WD PACKAGE
SN74ABTH16244 . . . DGG, DGV, OR DL PACKAGE
(TOP VIEW)
1OE 1
1Y1 2
1Y2 3
GND 4
1Y3 5
1Y4 6
V_CC 7
2Y1 8
2Y2 9
GND ¹⁰
2Y3 11
2Y4 12
3Y1 ¹³
3Y2 ¹⁴
GND ¹⁵
3Y3 ¹⁶
3Y4 ¹⁷
V_CC ¹⁸
4Y1 ¹⁹
4Y2 ²⁰
GND ²¹
4Y3 ²²
4Y4 ²³
4OE ²⁴
48 2OE
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CC
41 2A1
40 2A2
39 _GND
38 2A3
37 2A4
36 _3A1
35 _3A2
34 _GND
33 _3A3
32 _3A4
31 _VCC
30 _4A1
29 _4A2
28 _GND
27 _4A3
26 _4A4
25 _3OE
The ’ABTH16244 devices are 16-bit buffers and
line drivers designed specifically to improve both
the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented
receivers and transmitters. These devices can be
used as four 4-bit buffers, two 8-bit buffers, or one
16-bit buffer. These devices provide true outputs
and symmetrical active-low output-enable (OE)
inputs.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN54ABTH16244 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABTH16244 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus and EPIC-ΙΙB are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1