PTN04050C_11 Datasheet, PDF (1/19 Pages) Texas Instruments – 12-W, 3.3/5-V INPUT, WIDE OUTPUT ADJUSTABLE BOOST CONVERTER

PTN04050C
www.ti.com
SLTS251A – SEPTEMBER 2005 – REVISED FEBRUARY 2011
12-W, 3.3/5-V INPUT, WIDE OUTPUT ADJUSTABLE BOOST CONVERTER
Check for Samples: PTN04050C
FEATURES
1
• Up to 12 W Output Power
• Wide Input Voltage Range
(2.95 V to 5.5 V)
• Wide Output Voltage Adjust
(5 V to 15 V)
• High Efficiency (Up to 90%)
• Operating Temperature: –40°C to 85°C
• Surface Mount Package Available
APPLICATIONS
• Telecommunications, Instrumentation,
and General-Purpose Applications
DESCRIPTION
The PTN04050C is a 4-pin boost-voltage regulator product. In new designs it should be considered in place of
the PT5040 series of positive step-up products. The PTN04050C is smaller and lighter than its predecessors,
and has either similar or improved electrical performance characteristics. The case-less, double-sided package,
also exhibits improved thermal characteristics, and is compatible with TI's roadmap for RoHS and lead-free
compliance.
Operating over a 2.95V to 5.5V input range, the PTN04050C provides high-efficiency, step-up voltage conversion
for loads of up to 12W. The output voltage is set using a single external resistor. The PTN04050C may be set to
any value within the range, 5V to 15V. The output voltage of the PTN04050C can be as little as 0.5V higher than
the input, allowing an output voltage of 5V, with an input voltage of 4.5V.
The PTN04050C modules are suited to a wide variety of general-purpose applications that operate off 3.3-V or
5-V dc power.
STANDARD APPLICATION
V_I
C_I*
100 mF
Electrolytic
(Required)
1
4
PTN04050C
2
(Top View)
3
R_SET#
0.1 W, 1%
(Required)
GND
* See the Application Information section for capacitor recommendations.
# See the Application Information section for R_SET values.
V_O
C_O*
100 mF
Electrolytic
(Required)
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
© 2005–2011, Texas Instruments Incorporated