English
Language : 

PCM3006_08 Datasheet, PDF (1/30 Pages) Texas Instruments – Single-Ended Analog Input/Output Stereo Audio Codec
BurrĆBrown Products
from Texas Instruments
PCM3006
SBAS089A – OCTOBER 2000 – REVISED OCTOBER 2004
16-Bit, Single-Ended Analog Input/Output Stereo Audio Codec
FEATURES
• Monolithic 16-Bit ∆Σ ADC and DAC
• Stereo ADC:
– Single-Ended Voltage Input
– Antialiasing Filter
– 64× Oversampling
– High Performance
• THD+N: –84 dB
• SNR: 89 dB
• Dynamic Range: 89 dB
– Digital High-Pass Filter
• Stereo DAC:
– Single-Ended Voltage Output
– Analog Low-Pass Filter
– 8× Oversampling Digital Filter
– High Performance
• THD+N: –84 dB
• SNR: 93 dB
• Dynamic Range: 93 dB
• Special Features
– Digital De-Emphasis
– Power Down: ADC/DAC Independent
• Sampling Rate: 4 kHz to 48 kHz
• System Clock: 256 fS, 384 fS, 512 fS
• Single 3-V Power Supply
• Small Package: 24-Lead TSSOP
Lch In
Rch In
Analog Front-End
Delta-Sigma
Modulator
Lch Out
Rch Out
Low-Pass Filter
and
Output Buffer
Multilevel
Delta-Sigma
Modulator
APPLICATIONS
• Sampling Keyboards
• Digital Mixers
• Effects Processors
• Hard-Disk Recorders
• Data Recorders
• Digital Video Cameras
DESCRIPTION
The PCM3006 is a low-cost, single-chip stereo audio
codec (analog-to-digital and digital-to-analog con-
verters) with single-ended analog voltage input and
output.
Both ADCs and DACs employ delta-sigma modu-
lation with 64-times oversampling. The ADCs include
a digital decimation filter, and the DACs include an
8-times oversampling digital interpolation filter. The
DACs also include a digital de-emphasis function.
The PCM3006 operates with 16-bit, left-justified for
ADC, right-justified for DAC data formats.
The PCM3006 provides a power-down mode that
operates on the ADCs and DACs independently.
The PCM3006 is fabricated using a highly advanced
CMOS process, and is available in a small 24-pin
TSSOP package. The PCM3006 is suitable for a wide
variety of cost-sensitive consumer applications where
good performance is required.
Digital
Decimation
Filter
Oversampling
Digital
Interpolation
Filter
Serial Interface
and
Mode Control
Digital Out
Digital In
Parallel Mode Control
System Clock
B0006-02
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
System Two, Audio Precision are trademarks of Audio Precision, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2004, Texas Instruments Incorporated