PCM1800_16 Datasheet, PDF (1/27 Pages) Texas Instruments – STEREO ANALOG-TO-DIGITAL CONVERTER

PCM1800
www.ti.com ............................................................................................................................................... SBAS071B – OCTOBER 2000 – REVISED AUGUST 2008
SINGLE-ENDED ANALOG-INPUT 20-BIT STEREO ANALOG-TO-DIGITAL CONVERTER
FEATURES
1
•23 Dual 20-Bit Monolithic ΔΣ ADC
• Single-Ended Voltage Input
• 64× Oversampling Decimation Filter:
– Pass-Band Ripple: ±0.05 dB
– Stop-Band Attenuation: –65 dB
• High Performance:
– THD+N: –88 dB (typical)
– SNR: 95 dB (typical)
– Dynamic Range: 95 dB (typical)
– Internal High-Pass Filter
• PCM Audio Interface:
– Master/Slave Modes
– Four Data Formats
• Sampling Rate: 4 kHz to 48 kHz
• System Clock: 256 f_S, 384 f_S, or 512 f_S
• Single 5-V Power Supply
• Small 24-Pin SSOP Package
APPLICATIONS
• DVD Recorders
• DVD Receivers
• AV Amplifier Receivers
• Electric Musical Instruments
DESCRIPTION
The PCM1800 is a low-cost, single-chip stereo
analog-to-digital converter (ADC) with single-ended
analog voltage inputs. The PCM1800 uses a
delta-sigma modulator with 64 times oversampling,
including a digital decimation filter and a serial
interface which supports both master and slave
modes and four data formats. The PCM1800 is
suitable for a wide variety of cost-sensitive consumer
applications where good performance is required.
The PCM1800 is fabricated using a highly advanced
CMOS process and is available in a small 24-pin
SSOP package.
Analog Input (L)
Analog Input (R)
Analog Front-End
Delta-Sigma
Modulator
Digital
Decimation
Filter
Serial Interface
and
Format Control
Digital Output
Mode/Format Control
System Clock
B0003-01
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
System Two, Audio Precision are trademarks of Audio Precision, Inc.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2008, Texas Instruments Incorporated