PCI1410A_09 Datasheet, PDF (1/6 Pages) Texas Instruments – PC Card Controllers

PCI1410A GHK/GGU/PGE
www.ti.com
PC Card Controllers
SLLA227 – JUNE 2006
FEATURES
• Ability to wake from D3_hot and D3_cold
• Full compatiblity with the Intel 430TX (Mobile
Triton II) chipset
• A 144-terminal low-profile QFP (PGE),
144-terminal MicroStar BGA™ ball grid array
(GGU) package, or 209-terminal MicroStar
BGA™ (GHK) package
• 3.3-V core logic with universal PCI interfaces
compatible with 3.3-V and 5-V PCI signaling
environments
• Mix-and-match 5-V/3.3-V 16-bit PC Cards and
3.3-V CardBus Cards
• Single PC Card or CardBus slot with hot
insertion and removal
• Burst transfers to maximize data throughput
on the PCI bus and the CardBus bus
• Parallel PCI interrupts, parallel ISA IRQ and
parallel PCI interrupts, serial ISA IRQ with
parallel PCI interrupts, and serial ISA IRQ and
PCI interrupts
• Serial EEPROM interface for loading
subsystem ID and subsystem vendor ID
• Pipelined architecture allows greater than 130
Mbit/s sustained throughput from CardBus to
PCI and from PCI to CardBus
• Interface to parallel single-slot PC Card
power-switch interfaces like the TI™ TPS2211
device
• Up to five general-purpose I/Os
• Programmable output select for CLKRUN
• Five PCI memory windows and two I/O
windows available to the 16-bit PC Card
socket
• Two I/O windows and two memory windows
available to the CardBus socket
• Exchangeable card architecture (ExCA)
compatible registers are mapped in memory
and I/O space
• Compatibility with Intel 82365SL-DF and
82365SL registers
• Distributed DMA (DDMA) and PC/PCI DMA
• 16-bit DMA on the PC Card socket
• Ring indicate, SUSPEND, PCI CLKRUN, and
CardBus CCLKRUN
• Socket-activity LED pins
• PCI bus lock (LOCK)
• Advanced submicron, low-power CMOS
technology
• Internal ring oscillator
DESCRIPTION
The TI™ PCI1410A device is a high-performance PCI-to-PC Card controller that supports a single PC Card
socket compliant with the PC Card Standard. The PCI1410A device provides features that make it the best
choice for bridging between PCI and PC Cards in both notebook and desktop computers. The PC Card
Standard retains the 16-bit PC Card specification defined in PCI Local Bus Specification and defines the new
32-bit PC Card, CardBus, as being capable of full 32-bit data transfers at 33 MHz. The PCI1410A device
supports both 16-bit and CardBus PC Cards, powered at 5 V or 3.3 V, as required.
The PCI1410A device is compliant with the PCI Local Bus Specification, and its PCI interface can act as either a
PCI master device or a PCI slave device. The PCI bus mastering is initiated during 16-bit PC Card DMA
transfers or CardBus PC Card bridging transactions. The PCI1410A device also is compliant with the latest PCI
Bus Power Management Interface Specification and PCI Bus Power Management Interface Specification for PCI
to CardBus Bridges.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroStar BGA, TI are trademarks of Texas Instruments.
Intel is a trademark of Intel Corporation.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated