|
PCA9306-Q1_16 Datasheet, PDF (1/23 Pages) Texas Instruments – Voltage-Level Translator | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
PCA9306-Q1
SCPS178B â JULY 2007 â REVISED APRIL 2016
PCA9306-Q1 Dual Bidirectional I2C Bus and SMBus
Voltage-Level Translator
1 Features
â¢1 Qualified for Automotive Applications
⢠AEC-Q100 Qualified With the Following Results:
â Device Temperature Grade 2: â40°C to 105°C
â Device HBM ESD Classification Level H2
â Device CDM ESD Classification Level C4B
⢠2-Bit Bidirectional Translator for SDA and SCL
Lines in Mixed-Mode I2C Applications
⢠Compatible With I2C and SMBus
⢠Less Than 1.5-ns Maximum Propagation Delay to
Accommodate Standard-Mode and Fast-Mode I2C
Devices and Multiple Masters
⢠Allows Voltage-Level Translation Between
â 1.2-V VREF1 and 1.8-V, 2.5-V, 3.3-V, or 5-V
VREF2
â 1.8-V VREF1 and 2.5-V, 3.3-V, or 5-V VREF2
â 2.5-V VREF1 and 3.3-V, or 5-V VREF2
â 3.3-V VREF1 and 5-V VREF2
⢠Provides Bidirectional Voltage Translation With No
Direction Pin
⢠Low 3.5-Ω ON-State Connection Between Input
and Output Ports Provides Less Signal Distortion
⢠Open-Drain I2C I/O Ports (SCL1, SDA1, SCL2,
and SDA2)
⢠5-V Tolerant I2C I/O Ports to Support Mixed-Mode
Signal Operation
⢠High-Impedance SCL1, SDA1, SCL2, and SDA2
Pins for EN = Low
⢠Lock-Up-Free Operation for Isolation When
EN = Low
⢠Flow-Through Pinout for Ease of Printed-Circuit
Board Trace Routing
⢠Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
⢠ESD Protection Exceeds JESD 22
â 2000-V Human-Body Model (A114-A)
â 200-V Machine Model (A115-A)
â 1000-V Charged-Device Model (C101)
2 Applications
⢠I2C, SMBus, PMBus, MDIO, UART, Low-Speed
SDIO, GPIO, and Other Two-Signal Interfaces
⢠Automotive Head Units
⢠Automotive Instrument Clusters
⢠Automotive Driver Assistance Cameras
3 Description
This dual bidirectional I2C and SMBus voltage-level
translator, with an enable (EN) input, is operational
from 1.2-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2.
The PCA9306-Q1 allows bidirectional voltage
translations between 1.2 V and 5 V, without the use
of a direction pin. The low ON-state resistance (ron) of
the switch allows connections to be made with
minimal propagation delay. When EN is high, the
translator switch is ON, and the SCL1 and SDA1 I/O
are connected to the SCL2 and SDA2 I/O,
respectively, allowing bidirectional data flow between
ports. When EN is low, the translator switch is off,
and a high-impedance state exists between ports.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
PCA9306-Q1
VSSOP (8)
2.30 mm à 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application Diagram
PCA9306-Q1
Copyright © 2016 Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |