OPT3006 Datasheet, PDF (1/41 Pages) Texas Instruments – OPT3006 Ultra-Thin Ambient Light Sensor

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
OPT3006 Ultra-Thin Ambient Light Sensor
OPT3006
SBOS698 – OCTOBER 2016
1 Features
•1 Precision Optical Filtering to Match Human Eye:
– Rejects > 99% (typ) of IR
• Automatic Full-Scale Setting Feature Simplifies
Software and Provides Optimal Configuration
• Measurements: 0.01 lux to 83k lux
• 23-Bit Effective Dynamic Range With
Automatic Gain Ranging
• 12 Binary-Weighted Full-Scale Range Settings:
< 0.2% (typ) Matching Between Ranges
• Low Operating Current: 1.8 µA (typ)
• Operating Temperature Range: –40°C to +85°C
• Wide Power-Supply Range: 1.6 V to 3.6 V
• 5.5-V Tolerant I/O
• Flexible Interrupt System
• Small-Form Factor:
– 0.856 mm x 0.946 mm x 0.226 mm PicoStar™
Package
• OPT3006 is Smaller Version of OPT3001
2 Applications
• Smart Watches
• Wearable Electronics
• Health Fitness Bands
• Display Backlight Controls
• Lighting Control Systems
• Tablet and Notebook Computers
• Cameras
Spectral Response: The OPT3006 and Human Eye
1
OPT3006
0.9
Human Eye
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
300 400 500 600 700 800 900 1000
Wavelength (nm)
D001
3 Description
The OPT3006 is a single-chip lux meter, measuring
the intensity of visible light as seen by the human
eye. The OPT3006 is available in an ultra-small
PicoStar package, so the device fits into tiny spaces.
The precision spectral response of the sensor tightly
matches the photopic response of the human eye.
With strong infrared (IR) rejection, the OPT3006
accurately meters the intensity of light as seen by the
human eye, regardless of the light source. The strong
IR rejection also aids in maintaining high accuracy
when design requires mounting the sensor under
dark glass. The OPT3006, often in conjunction with
backlight ICs or lighting control systems, creates light-
based experiences for humans, and is an ideal
replacement for photodiodes, photoresistors, or
lower-performing ambient light sensors.
Measurements can be made from 0.01 lux up to 83k
lux without manually selecting full-scale ranges by
using the built-in, full-scale setting feature. This
capability allows light measurement over a 23-bit
effective dynamic range.
The digital operation is flexible for system integration.
Measurements can be either continuous or single-
shot. The control and interrupt system features
autonomous operation, allowing the processor to
sleep while the sensor searches for appropriate
wake-up events to report with the interrupt pin. The
digital output is reported over an I²C- and SMBus-
compatible, two-wire serial interface.
The low power consumption and low power-supply
voltage capability of the OPT3006 enhance the
battery life of battery-powered systems.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
OPT3006
PicoStar (6)
0.856 mm x 0.946 mm x
0.226 mm
(1) For all available packages, see the package option addendum
at the end of the datasheet.
Block Diagram
VDD
Ambient
Light
Optical
Filter
OPT3006
ADC
VDD
I²C
Interface
SCL
SDA
INT
ADDR
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.