OPA698M Datasheet, PDF (1/32 Pages) Texas Instruments – UNITY-GAIN STABLE WIDEBAND VOLTAGE LIMITING AMPLIFIER

OPA698M
www.ti.com
SGLS287A – MAY 2005 – REVISED MARCH 2006
UNITY-GAIN STABLE WIDEBAND VOLTAGE LIMITING AMPLIFIER
FEATURES
• High Linearity Near Limiting
• Fast Recovery from Overdrive: 1 ns
• Limiting Voltage Accuracy: ±15 mV
• -3-dB Bandwidth (G = +1): 450 MHz
• Slew Rate: 1100 V/ms
• ±5-V and 5-V Supply Operation
• Unity Gain Version of the OPA699
APPLICATIONS
• Fast Limiting ADC Input Buffers
• CCD Pixel Clock Stripping
• Video Sync Stripping
• HF Mixers
• IF Limiting Amplifiers
• AM Signal Generation
• Non-Linear Analog Signal Processing
• OPA688M Replacement
JD PACKAGE
(TOP VIEW)
NC 1
INVERTING INPUT 2
NONINVERTING INPUT 3
-V_S 4
8 V_H
7 +V_S
6 OUTPUT
5 V_L
NC - No internal connection
P0013-01
DESCRIPTION
The OPA698 is a wideband, unity gain stable voltage-feedback op amp that offers bipolar output voltage limiting.
Two buffered limiting voltages take control of the output when it attempts to drive beyond these limits. This new
output limiting architecture holds the limiter offset error to ±15 mV. The op amp operates linearly to within 30 mV
of the output limit voltages.
The combination of narrow nonlinear range and low limiting offset allows the limiting voltages to be set within
100 mV of the desired linear output range. A fast 1-ns recovery from limiting ensures that overdrive signals will
be transparent to the signal channel. Implementing the limiting function at the output, as opposed to the input,
gives the specified limiting accuracy for any gain and allows the OPA698 to be used in all standard op amp
applications.
Non-linear analog signal processing benefits from the ability of the OPA698 to sharply transition from linear
operation to output limiting. The quick recovery time supports high-speed applications.
The OPA698M is available in an industry standard pinout CDIP-8 package. For higher gain or transimpedance
applications requiring output limiting with fast recovery, consider the OPA699M.
ORDERING INFORMATION⁽¹⁾
T_A
–55°C to 125°C
PACKAGE
CDIP – JD
Tube
ORDERABLE
PART NUMBER
OPA698MJD
TOP-SIDE
MARKING
OPA698MJD
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2006, Texas Instruments Incorporated