OPA564-Q1 Datasheet, PDF (1/34 Pages) Texas Instruments – 1.5A, 24V, 17MHz POWER OPERATIONAL AMPLIFIER

OPA564-Q1
www.ti.com
1.5A, 24V, 17MHz
POWER OPERATIONAL AMPLIFIER
Check for Samples: OPA564-Q1
SBOS567 – JUNE 2011
FEATURES
1
•23 Qualified for Automotive Applications
• High Output Current: 1.5A
• Wide Power-Supply Range:
– Single Supply: +7V to +24V
– Dual Supply: ±3.5V to ±12V
• Large Output Swing: 20V_PP at 1.5A
• Fully Protected:
– Thermal Shutdown
– Adjustable Current Limit
• Diagnostic Flags:
– Over-Current
– Thermal Shutdown
• Output ENABLE/SHUTDOWN Control
• High Speed:
– Gain-Bandwidth Product: 17MHz
– Full-Power Bandwidth at 10V_PP: 1.3MHz
– Slew Rate: 40V/μs
• Diode for Junction Temperature Monitoring
• HSOP-20 PowerPAD™ Package
(Bottom- and Top-Side Thermal Pad Versions)
APPLICATIONS
• Powerline Communications
• Valve, Actuator Driver
• V_COM Driver
• Motor Driver
• Audio Power Amplifier
• Power-Supply Output Amplifier
• Test Equipment Amplifier
• Transducer Excitation
• Laser Diode Driver
• General-Purpose Linear Power Booster
DESCRIPTION
The OPA564-Q1 is a low-cost, high-current
operational amplifier that is ideal for driving up to
1.5A into reactive loads. The high slew rate provides
1.3MHz full-power bandwidth and excellent linearity.
These monolithic integrated circuits provide high
reliability in demanding powerline communications
and motor control applications.
The OPA564-Q1 operates from a single supply of 7V
to 24V, or dual power supplies of ±3.5V to ±12V. In
single-supply operation, the input common-mode
range extends to the negative supply. At maximum
output current, a wide output swing provides a 20V_PP
(I_OUT = 1.5A) capability with a nominal 24V supply.
The OPA564-Q1 is internally protected against
over-temperature conditions and current overloads. It
is designed to provide an accurate, user-selected
current limit. Two flag outputs are provided; one
indicates current limit and the second shows a
thermal over-temperature condition. It also has an
Enable/Shutdown pin that can be forced low to shut
down the output, effectively disconnecting the load.
The OPA564-Q1 is housed in a thermally-enhanced,
surface-mount PowerPAD™ package (HSOP-20) with
the choice of the thermal pad on either the top side or
the bottom side of the package.
OPA564-Q1 RELATED PRODUCTS
FEATURES
DEVICE
Zerø-Drift PGA with 2-Channel Input Mux and
SPI
PGA112
Zerø-Drift Operational Amplifier, 50MHz, RRI/O,
Single-Supply
OPA365
Quad Operational Amplifier, JFET Input , Low
Noise
TL074
Power Operational Amplifier, 1.2A, 15V,
17MHz, 50V/μs
OPA561
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments, Inc.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated