OPA4314AIPWR Datasheet, PDF (1/36 Pages) Texas Instruments – 3-MHz, Low-Power, Low-Noise, RRIO, 1.8-V CMOS Operational Amplifier

www.ti.com
OPA314
OPA2314
OPA4314
SBOS563F – MAY 2011 – REVISED AUGUST 2013
3-MHz, Low-Power, Low-Noise, RRIO, 1.8-V CMOS
Operational Amplifier
Check for Samples: OPA314, OPA2314, OPA4314
FEATURES
1
•2 Low I_Q: 150 µA/ch
• Wide Supply Range: 1.8 V to 5.5 V
• Low Noise: 14 nV/√Hz at 1 kHz
• Gain Bandwidth: 3 MHz
• Low Input Bias Current: 0.2 pA
• Low Offset Voltage: 0.5 mV
• Unity-Gain Stable
• Internal RF/EMI Filter
• Extended Temperature Range:
–40°C to +125°C
APPLICATIONS
• Battery-Powered Instruments:
– Consumer, Industrial, Medical
– Notebooks, Portable Media Players
• Photodiode Amplifiers
• Active Filters
• Remote Sensing
• Wireless Metering
• Handheld Test Equipment
DESCRIPTION
The OPA314 family of single-, dual-, and quad-
channel operational amplifiers represents a new
generation of low-power, general-purpose CMOS
amplifiers. Rail-to-rail input and output swings, low
quiescent current (150 μA typ at 5.0 V_S) combined
with a wide bandwidth of 3 MHz, and very low noise
(14 nV/√Hz at 1 kHz) make this family very attractive
for a variety of battery-powered applications that
require a good balance between cost and
performance. The low input bias current supports
applications with mega-ohm source impedances.
The robust design of the OPA314 devices provides
ease-of-use to the circuit designer: unity-gain stability
with capacitive loads of up to 300 pF, an integrated
RF/EMI rejection filter, no phase reversal in overdrive
conditions, and high electrostatic discharge (ESD)
protection (4-kV HBM).
These devices are optimized for low-voltage
operation as low as +1.8 V (±0.9 V) and up to +5.5 V
(±2.75 V), and are specified over the full extended
temperature range of –40°C to +125°C.
The OPA314 (single) is available in both SC70-5 and
SOT23-5 packages. The OPA2314 (dual) is offered in
SO-8, MSOP-8, and DFN-8 packages. The quad-
channel OPA4314 is offered in a TSSOP-14 package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated