MSP430TCH5E_14 Datasheet, PDF (1/68 Pages) Texas Instruments – Haptics-Enabled Mixed-Signal Microcontroller

MSP430TCH5E
www.ti.com
SLAS895 – DECEMBER 2013
Haptics-Enabled Mixed-Signal Microcontroller
Check for Samples: MSP430TCH5E
FEATURES
1
•23 Haptics-Enabled Device Authenticated to Run
Immersion TouchSense™ Technology
– Supports 122 Different Haptic Effects
– Supports Wide Range of LRA and ERM
Actuators Offering Maximum Design
Flexibility
– Highly Customizable Haptics Effects:
Multiple-Effect Sequencing, Delays, and
Repeat Counters
– Supports Audio Synchronized Haptics
Playout (Audio-to-Haptics)
– Supports Programmable Solution Allowing
Integration With Capacitive Touch and
Other System Controller Functionality
– With Licenses Included
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low-Power Consumption
– Active Mode: 230 µA at 1 MHz, 2.2 V
– Standby Mode: 0.5 µA
– Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequency
– Internal Very-Low-Power Low-Frequency
(LF) Oscillator
– 32-kHz Crystal
– External Digital Clock Source
• Two 16-Bit Timer_A With Three
Capture/Compare Registers
• Up to 24 Capacitive Touch I/O Pins
• Universal Serial Communication Interface
(USCI)
– Enhanced UART With Automatic Baud Rate
Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– I²C
• On-Chip Comparator for Analog Signal
Compare Function or Slope Analog-to-Digital
(A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital Converter
(ADC) With Internal Reference, Sample-and-
Hold, and Autoscan
• Brownout Detector
• Serial Onboard Programming,
No External Programming Voltage Needed,
Programmable Code Protection by Security
Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
Interface
• Family Members are Summarized in Table 1
• Available in 28-Pin TSSOP and 32-Pin QFN
(RHB) Packages
• For Complete Module Descriptions, see the
MSP430x2xx Family User’s Guide (SLAU144)
APPLICATIONS
• Touch-Enabled Devices That Require Both
Capacitive Touch and Haptics Solutions
Integrated
• Portable Gaming Consoles
• Portable Navigation Devices
• Application Consoles
• Tablets
• Mobile Phones
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430 is a trademark of Texas Instruments.
2
TouchSense is a trademark of Immersion Corporation.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated