MSP430G2744 Datasheet, PDF (1/73 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430G2744
MSP430G2544
MSP430G2444
SLAS892A – MARCH 2013 – REVISED APRIL 2013
MIXED SIGNAL MICROCONTROLLER
Check for Samples: MSP430G2744, MSP430G2544, MSP430G2444
FEATURES
1
•23 Low Supply Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 270 µA at 1 MHz, 2.2 V
– Standby Mode: 1 µA
– Off Mode (RAM Retention): 0.1 µA
• Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies
– Internal Very-Low-Power Low-Frequency
(LF) Oscillator
– 32-kHz Crystal
– High-Frequency (HF) Crystal up to 16 MHz
– Resonator
– External Digital Clock Source
– External Resistor
• 16-Bit Timer_A With Three Capture/Compare
Registers
• 16-Bit Timer_B With Three Capture/Compare
Registers
• Universal Serial Communication Interface
– Enhanced UART Supports Auto-Baudrate
Detection (LIN)
– IrDA Encoder and Decoder
– Synchronous SPI
– I2C™
• 10-Bit 200-ksps Analog-to-Digital (A/D)
Converter With Internal Reference, Sample-
and-Hold, Autoscan, and Data Transfer
Controller
• Brownout Detector
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• Bootstrap Loader
• On-Chip Emulation Module
• Family Members
– MSP430G2444
– 8KB + 256B Flash Memory
– 512B RAM
– MSP430G2544
– 16KB + 256B Flash Memory
– 512B RAM
– MSP430G2744
– 32KB + 256B Flash Memory
– 1KB RAM
• Family Members are Summarized in Table 1
• Package Options
– TSSOP: 38 Pin (DA)
– QFN: 40 Pin (RHA)
– DSBGA: 49 Pin (YFF)
– PDIP: 40 Pin (N) Available in Sampling
Quantities
• For Complete Module Descriptions, See the
MSP430x2xx Family User's Guide (SLAU144)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430 is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated