MSP430G22X0_15 Datasheet, PDF (1/46 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G22x0
www.ti.com
SLAS753E – JANUARY 2012 – REVISED FEBRUARY 2013
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
•23 Low Supply Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 220 µA at 1 MHz, 2.2 V
– Standby Mode: 0.5 µA
– Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Basic Clock Module Configurations
– Internal Frequencies up to 16 MHz With
Four Calibrated Frequencies to ±1%
– Internal Very-Low-Power Low-Frequency
Oscillator
• 16-Bit Timer_A With Two Capture/Compare
Registers
• On-Chip Comparator for Analog Signal
Compare Function or Slope Analog-to-Digital
(A/D) Conversion (MSP430G2210 Only)
• 10-Bit 200-ksps Analog-to-Digital (A/D)
Converter With Internal Reference, Sample-
and-Hold, and Autoscan (MSP430G2230 Only)
• Universal Serial Interface (USI) Supports SPI
and I2C (MSP430G2230 Only)
• Brownout Detector
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
Interface
• Family Members:
– MSP430G22x0
– 2KB + 256B Flash Memory
– 128B RAM
• Available in 8-Pin Plastic Packages (D)
• For Complete Module Descriptions, See the
MSP430x2xx Family User's Guide (SLAU144)
DESCRIPTION
The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G22x0 series is an ultra-low-power mixed signal microcontroller with a built-in 16-bit timer and four
I/O pins. In addition, the MSP430G2230 has a built-in communication capability using synchronous protocols
(SPI or I2C) and a 10-bit A/D converter. The MSP430G2210 has a versatile analog comparator.
Table 1. Available Options⁽¹⁾
PACKAGED DEVICES⁽²⁾
T_A
PLASTIC 8-PIN (D)
-40°C to 85°C
MSP430G2230ID
MSP430G2210ID
(1) For the most current package and ordering information, see the
Package Option Addendum at the end of this document, or see the
TI web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at
www.ti.com/packaging
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430 is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2013, Texas Instruments Incorporated