MSP430F471X3_14 Datasheet, PDF (1/88 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F471x3, MSP430F471x6, MSP430F471x7
MIXED SIGNAL MICROCONTROLLER
D Low Supply-Voltage Range: 1.8 V to 3.6 V
D Ultralow Power Consumption
-- Active Mode: 350 A at 1 MHz, 2.2 V
-- Standby Mode: 1.1 A
-- Off Mode (RAM Retention): 0.2 A
D Five Power-Saving Modes
D Wake-Up From Standby Mode in Less
Than 6 s
D 16-Bit RISC Architecture,
62.5-ns Instruction Cycle Time
D Three-Channel Internal DMA
D Three, Six or Seven 16-Bit Sigma-Delta
Analog-to-Digital (A/D) Converters With
Differential PGA Inputs
D 16-Bit Timer_B With Three
Capture/Compare-With-Shadow Registers
D 16-Bit Timer_A With Three
Capture/Compare Registers
D On-Chip Comparator
D Four Universal Serial Communication
Interface (USCI) Modules
-- USCI_A0 and USCI_A1
-- Enhanced UART Supporting
Auto-Baudrate Detection
-- IrDA Encoder and Decoder
-- Synchronous SPI
-- USCI_B0 and USCI_B1
-- I2C
-- Synchronous SPI
D Integrated LCD Driver With Contrast
Control for Up to 160 Segments
D Basic Timer With Real-Time Clock Feature
D 32-Bit Hardware Multiplier
D Brownout Detector
D Supply Voltage Supervisor/Monitor With
Programmable Level Detection
D Serial Onboard Programming,
No External Programming Voltage Needed
Programmable Code Protection by Security
Fuse
SLAS626C -- OCTOBER 2008 -- REVISED MARCH 2011
D Bootstrap Loader
D On-Chip Emulation Module
D Family Members Include
MSP430F47163: 92KB Flash, 4KB RAM
3 Sigma-Delta ADCs
MSP430F47173: 92KB Flash, 8KB RAM
3 Sigma-Delta ADCs
MSP430F47183: 116KB Flash, 8KB RAM
3 Sigma-Delta ADCs
MSP430F47193: 120KB Flash, 4KB RAM
3 Sigma-Delta ADCs
MSP430F47126: 56KB Flash, 4KB RAM
6 Sigma-Delta ADCs
MSP430F47166: 92KB Flash, 4KB RAM
6 Sigma-Delta ADCs
MSP430F47176: 92KB Flash, 8KB RAM
6 Sigma-Delta ADCs
MSP430F47186: 116KB Flash, 8KB RAM
6 Sigma-Delta ADCs
MSP430F47196: 120KB Flash, 4KB RAM
6 Sigma-Delta ADCs
MSP430F47127: 56KB Flash, 4KB RAM
7 Sigma-Delta ADCs
MSP430F47167: 92KB Flash, 4KB RAM
7 Sigma-Delta ADCs
MSP430F47177: 92KB Flash, 8KB RAM
7 Sigma-Delta ADCs
MSP430F47187: 116KB Flash, 8KB RAM
7 Sigma-Delta ADCs
MSP430F47197: 120KB Flash, 4KB RAM
7 Sigma-Delta ADCs
D Available in a 100-Pin Plastic Quad
Flatpack (QFP) Package
D For Complete Module Descriptions, See the
MSP430x4xx Family User’s Guide,
Literature Number SLAU056
D For E-Meter Reference Design and
Software, See Implementation of a
Three-Phase Electronic Watt-Hour Meter
using the MSP430F471xx, Literature
Number SLAA409
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range
from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device not to meet its published specifications. These devices have limited
built-in ESD protection.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2011, Texas Instruments Incorporated
1