MSP430F261X_14 Datasheet, PDF (1/104 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430F261x
MSP430F241x
SLAS541K – JUNE 2007 – REVISED NOVEMBER 2012
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
• Low Supply Voltage Range 1.8 V to 3.6 V
• Ultra-Low Power Consumption
– Active Mode: 365 µA at 1 MHz, 2.2 V
– Standby Mode (VLO): 0.5 µA
– Off Mode (RAM Retention): 0.1 µA
• Wake-Up From Standby Mode in Less Than
1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
Cycle Time
• Three-Channel Internal DMA
• 12-Bit Analog-to-Digital (A/D) Converter With
Internal Reference, Sample-and-Hold, and
Autoscan Feature
• Dual 12-Bit Digital-to-Analog (D/A) Converters
With Synchronization
• 16-Bit Timer_A With Three Capture/Compare
Registers
• 16-Bit Timer_B With Seven Capture/Compare-
With-Shadow Registers
• On-Chip Comparator
• Four Universal Serial Communication
Interfaces (USCIs)
– USCI_A0 and USCI_A1
– Enhanced UART Supporting Auto-
Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1
– I²C™
– Synchronous SPI
• Supply Voltage Supervisor/Monitor With
Programmable Level Detection
• Brownout Detector
• Bootstrap Loader
• Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
• Family Members:
– MSP430F2416
– 92KB + 256B Flash Memory
– 4KB RAM
– MSP430F2417
– 92KB + 256B Flash Memory
– 8KB RAM
– MSP430F2418
– 116KB + 256B Flash Memory
– 8KB RAM
– MSP430F2419
– 120KB + 256B Flash Memory
– 4KB RAM
– MSP430F2616
– 92KB + 256B Flash Memory
– 4KB RAM
– MSP430F2617
– 92KB + 256B Flash Memory
– 8KB RAM
– MSP430F2618
– 116KB + 256B Flash Memory
– 8KB RAM
– MSP430F2619
– 120KB + 256B Flash Memory
– 4KB RAM
• Available in 80-Pin Quad Flat Pack (LQFP), 64-
Pin LQFP, and 113-Pin Ball Grid Array (BGA)
(See Table 1)
• For Complete Module Descriptions, See the
MSP430x2xx Family User's Guide (SLAU144)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2012, Texas Instruments Incorporated