MSP430F11X_16 Datasheet, PDF (1/36 Pages) Texas Instruments –



MIXED SIGNAL MICROCONTROLLER

D Low Supply Voltage Range 1.8 V to 3.6 V
D Ultralow-Power Consumption:
− Active Mode: 200 µA at 1 MHz, 2.2 V
− Standby Mode: 0.8 µA
− Off Mode (RAM Retention): 0.1 µA
D Wake-Up From Standby Mode in less
than 6 µs
D 16-Bit RISC Architecture, 125 ns
Instruction Cycle Time
D Basic Clock Module Configurations:
− Various Internal Resistors
− Single External Resistor
− 32 kHz Crystal
− High Frequency Crystal
− Resonator
− External Clock Source
D 16-Bit Timer_A With Three
Capture/Compare Registers
D Serial Onboard Programming,
No External Programming Voltage
Needed
MSP430F11x
MIXED SIGNAL MICROCONTROLLER
SLAS256D − NOVEMBER 1999 − REVISED SEPTEMBER 2004
D Family Members Include:
MSP430F110: 1KB + 128B Flash Memory
128B RAM
MSP430F112: 4KB + 256B Flash Memory
256B RAM
D Available in a 20-Pin Plastic Small-Outline
Wide Body (SOWB) Package and 20-Pin
Plastic Thin Shrink Small-Outline Package
(TSSOP)
D For Complete Module Descriptions, Refer
to the MSP430x1xx Family User’s Guide,
Literature Number SLAU049
DW OR PW PACKAGE
(TOP VIEW)
TEST
1
V_CC
2
P2.5/R_osc
3
V_SS
4
XOUT/TCLK
5
XIN
6
RST/NMI
7
P2.0/ACLK
8
P2.1/INCLK
9
P2.2/TA0
10
20
P1.7/TA2/TDO/TDI
19
P1.6/TA1/TDI
18
P1.5/TA0/TMS
17
P1.4/SMCLK/TCK
16
P1.3/TA2
15
P1.2/TA1
14
P1.1/TA0
13
P1.0/TACLK
12
P2.4/TA2
11
P2.3/TA1
description
The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs.
The MSP430F11x series is an ultralow-power mixed signal microcontroller with a built in 16-bit timer and
fourteen I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then
process the data and display them or transmit them to a host system. Stand alone RF sensor front-end is another
area of application.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  1999 − 2004, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1