MSP430BT5190_14 Datasheet, PDF (1/102 Pages) Texas Instruments – Mixed Signal Microcontroller

MSP430BT5190
www.ti.com
SLAS703A – APRIL 2010 – REVISED AUGUST 2013
Mixed Signal Microcontroller
Check for Samples: MSP430BT5190
FEATURES
1
•234 Designed for Use With CC2560 TI Bluetooth ®
Based Solutions ⁽¹⁾
• Commercially Licensed Mindtree™ Ethermind
Bluetooth Stack for MSP430
– Bluetooth v2.1 + Enhanced Data Rate (EDR)
Compliant
– Serial Port Profile (SPP)
– Sample Applications
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
• Low Supply Voltage Range:
3.6 V Down to 1.8 V
– Low-Power Low-Frequency Internal Clock
Source (VLO)
• Ultralow-Power Consumption
– Active Mode (AM):
All System Clocks Active
230 µA/MHz at 8 MHz, 3 V, Flash Program
Execution (Typical)
110 µA/MHz at 8 MHz, 3 V, RAM Program
Execution (Typical)
– Standby Mode (LPM3):
Real-Time Clock With Crystal, Watchdog,
and Supply Supervisor Operational, Full
RAM Retention, Fast Wake-Up:
1.7 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-
Purpose Counter, Watchdog, and Supply
Supervisor Operational, Full RAM
Retention, Fast Wake-Up:
1.2 µA at 3 V (Typical)
– Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wake-Up:
1.2 µA at 3 V (Typical)
– Shutdown Mode (LPM4.5):
0.1 µA at 3 V (Typical)
• Wake Up From Standby Mode in Less Than
5 µs
• 16-Bit RISC Architecture
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals
– High-Frequency Crystals up to 32 MHz
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Up to Four Universal Serial Communication
Interfaces
– USCI_A0, USCI_A1, USCI_A2, and USCI_A3
Each Support:
– Enhanced UART Supports Auto-
Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0, USCI_B1, USCI_B2, and USCI_B3
Each Support:
– I²C
– Synchronous SPI
• 12-Bit Analog-to-Digital Converter (ADC)
– Internal Reference
– 14 External Channels, 2 Internal Channels
• Hardware Multiplier Supports 32-Bit
Operations
(1) The Bluetooth word mark and logos are owned by Bluetooth
SIG, Inc., and any use of such marks by Texas Instruments is
• Serial Onboard Programming, No External
Programming Voltage Needed
under license.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430, Code Composer Studio are trademarks of Texas Instruments.
2
Mindtree is a trademark of Mindtree Ltd.
3
All other trademarks are the property of their respective owners.
4
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2013, Texas Instruments Incorporated