|
MCP6291 Datasheet, PDF (1/25 Pages) Microchip Technology – 1.0 mA, 10 MHz Rail-to-Rail Op Amp | |||
|
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
MCP6291, MCP6292, MCP6294
SBOS879 â JULY 2017
MCP629x 10-MHz, Rail-to-Rail Operational Amplifier
1 Features
â¢1 Gain Bandwidth Product: 10 MHz Typical
⢠Operating Supply Voltage: 2.4 V to 5.5 V
⢠Rail-to-Rail Input/Output
⢠Low Input Bias Current: 1 pA
⢠Low Quiescent Current: 0.6 mA
⢠Input Voltage Noise: 8.7 nV/âHz at f = 10 kHz
⢠Internal RF and EMI Filter
⢠Extended Temperature Range: â40°C to +125°C
⢠Unity-Gain Stable
⢠Easier to Stabilize with Higher Capacitive Load
Due to Resistive Open-Loop Output Impedance
2 Applications
⢠Power Modules
⢠Smoke Detectors
⢠HVAC: Heating, Ventilating, and Air Conditioning
⢠Battery-Powered Applications
⢠Sensor Signal Conditioning
⢠Photodiode Amplifier
⢠Analog Filters
⢠Medical Instrumentation
⢠Notebooks and PDAs
⢠Barcode Scanners
⢠Audio Receiver
⢠Automotive Infotainment
Low-Side Motor Control
Vbus
Iload
Zload
5V
VSHUNT
Rshunt
0.1
MCP629x
VOUT
RF
165k
RG
3.4k
3 Description
The MCP6291 (single), MCP6292 (dual), and
MCP6294 (quad) devices comprise a family of
general-purpose, low-power operational amplifiers.
Features such as rail-to-rail input and output swings,
low quiescent current (600 μA/ch typical) combined
with a wide bandwidth of 10 MHz, and very-low noise
(8.7 nV/âHz at 10 kHz) make this family attractive for
a variety of applications that require a good balance
between cost and performance. Its low input bias
current enables the family to be used in applications
with high-source impedances.
The robust design of the MCP629x provides ease-of-
use to the circuit designerâa unity-gain stable,
integrated RFI/EMI rejection filter, no phase reversal
in overdrive condition, and high electrostatic
discharge (ESD) protection (4-kV HBM).
The MCP629x family operates over the Extended
Temperature Range of â40°C to +125°C. It also has
a power supply range of 2.4 V to 5.5 V.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOT-23 (5)
1.60 mm à 2.90 mm
SC70 (5)
MCP6291 (preview)
SOT553 (5)
1.25 mm à 2.00 mm
1.65 mm x 1.20 mm
SOIC (8)
3.91 mm à 4.90 mm
SOIC (8)
3.91 mm à 4.90 mm
MCP6292
WSON (8)
VSSOP (8)
2.00 mm x 2.00 mm
3.00 mm à 3.00 mm
VSSOP (10)
3.00 mm à 3.00 mm
SOIC(14)
MCP6294 (preview)
TSSOP (14)
8.65 mm à 3.91 mm
4.40 mm à 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Small-Signal Overshoot vs Load Capacitance
60
50
40
30
20
10
0
0
Overshoot+
Overshoot-
50
100
150
200
250
300
Capacitive Load (pF)
C025
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |