|
MAX3232_16 Datasheet, PDF (1/27 Pages) Texas Instruments – MAX3232 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver | |||
|
MAX3232
SLLS410K â JANUARY 2000 â REVISED JANUARY 2015
MAX3232 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver
With ±15-kV ESD Protection
1 Features
â¢1 RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
⢠Meets or Exceeds the Requirements of TIA/EIA-
232-F and ITU V.28 Standards
⢠Operates With 3-V to 5.5-V VCC Supply
⢠Operates up to 250 kbit/s
⢠Two Drivers and Two Receivers
⢠Low Supply Current: 300 μA Typical
⢠External Capacitors: 4 à 0.1 μF
⢠Accepts 5-V Logic Input With 3.3-V Supply
⢠Alternative High-Speed Terminal-Compatible
Devices (1 Mbit/s)
â SN65C3232 (â40°C to 85°C)
â SN75C3232 (0°C to 70°C)
2 Applications
⢠Battery-Powered Systems
⢠PDAs
⢠Notebooks
⢠Laptops
⢠Palmtop PCs
⢠Hand-Held Equipment
3 Description
The MAX3232 device consists of two line drivers, two
line receivers, and a dual charge-pump circuit with
±15-kV ESD protection terminal to terminal (serial-
port connection terminals, including GND). The
device meets the requirements of TIA/EIA-232-F and
provides the electrical interface between an
asynchronous communication controller and the
serial-port connector. The charge pump and four
small external capacitors allow operation from a
single 3-V to 5.5-V supply. The devices operate at
data signaling rates up to 250 kbit/s and a maximum
of 30-V/μs driver output slew rate.
Device Information(1)
PART NUMBER PACKAGE (PIN) BODY SIZE
SOIC (16)
9.90 mm à 3.91 mm
MAX3232
SSOP (16)
SOIC (16)
6.20 mm à 5.30 mm
10.30 mm à 7.50
mm
TSSOP (16)
5.00 mm à 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Simplified Schematic
3.3 V, 5 V
POWER
2
DIN
TX
2
DOUT
RS232
2
ROUT
2
RIN
RX
RS232
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |