|
MAX232E_16 Datasheet, PDF (1/27 Pages) Texas Instruments – Dual RS-232 Driver and Receiver | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
MAX232E
SLLS723C â APRIL 2006 â REVISED AUGUST 2016
MAX232E Dual RS-232 Driver and Receiver With IEC61000-4-2 Protection
1 Features
â¢1 Meets or Exceeds TIA/RS-232-F and ITU
Recommendation V.28
⢠ESD Protection for RS-232 Bus Pins
â ±15-kV Human-Body Model (HBM)
â ±8-kV IEC61000-4-2, Contact Discharge
â ±15-kV IEC61000-4-2, Air-Gap Discharge
⢠Operates From a Single 5-V Power Supply With
1-µF Charge-Pump Capacitors
⢠Operates up to 250 kbit/s
⢠Two Drivers and Two Receivers
⢠Low Supply Current: 8 mA Typical
2 Applications
⢠TIA/RS-232-F
⢠Battery-Powered Systems
⢠Terminals
⢠Modems
⢠Computers
3 Description
The MAX232E is a dual driver and receiver that
includes a capacitive voltage generator to supply RS-
232-F compliant voltage levels from a single 5-V
supply. Each receiver converts RS-232 inputs to 5-V
TTL/CMOS levels. This receiver has a typical
threshold of 1.3 V, a typical hysteresis of 0.5 V, and
can accept ±30-V inputs. Each driver converts
TTL/CMOS input levels into TIA/RS-232-F levels.
Device Information(1)
PART NUMBER PACKAGE (PINS) BODY SIZE (NOM)
MAX232ECD
MAX232EID
SOIC (16)
9.90 mm à 3.91 mm
MAX232ECDW
MAX232EIDW
SOIC WIDE (16) 10.30 mm à 7.50 mm
MAX232ECN
MAX232EIN
PDIP (16)
19.30 mm à 6.35 mm
MAX232ECPW
MAX232EIPW
TSSOP (16)
5.00 mm à 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram (Positive Logic)
5V
POWER
2
DIN
TX
2 DOUT
RS-232
250 kb/s IEC61000-4-2
2
ROUT
2
RIN
RX
RS-232
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |