LP5952_14 Datasheet, PDF (1/27 Pages) Texas Instruments – 350mA Dual Rail Linear Regulator

LP5952
www.ti.com
SNVS469D – OCTOBER 2006 – REVISED JUNE 2008
350mA Dual Rail Linear Regulator
Check for Samples: LP5952
FEATURES
1
•2 Excellent load transient response: ±15mV
typical
• Excellent line transient response: ±1mV typical
• 0.7V ≤ V_IN ≤ 4.5V
• 2.5V ≤ V_BATT ≤ 5.5V
• 0.5V ≤ V_OUT ≤ 2.0V
• For I_LOAD = 350mA:
– V_BATT ≥ V_OUT(NOM) + 1.5V or 2.5V whichever
is higher
• For I_LOAD = 150mA:
– V_BATT ≥ V_OUT(NOM) + 1.3V or 2.5V whichever
is higher
• 50µA typical quiescent current from V_BATT
• 10µA typical quiescent current from V_IN
• 0.1µA typical quiescent current in shutdown
• Guaranteed 350mA output current
• Noise voltage = 100µV_RMS typical
• Operates from a single Li-Ion cell or 3 cell
NiMH/NiCd batteries
• Only one or two tiny surface-mount external
components required depending on
application
• Small, thin 5-bump micro SMD package and 6-
pin Chip On Lead LLP package, lead free
• Thermal-overload and short-circuit protection
• -40°C to +125°C junction temperature range
APPLICATIONS
• Mobile Phones
• Hand-Held Radios
• Personal Digital Assistants
• Palm-Top PCs
• Portable Instruments
• Battery Powered Devices
DESCRIPTION
The LP5952 is a Dual Supply Rail Linear Regulator optimized for powering ultra-low voltage circuits from a single
Li-Ion cell or 3 cell NiMH/NiCd batteries.
In the typical post regulation application V_BATT is directly connected to the battery (range 2.5V...5.5V) and V_IN is
supplied by the output voltage of the DC-DC Converter (range 0.7V...4.5V).
The device offers superior dropout and transient features combined with very low quiescent currents. In
shutdown mode (Enable pin pulled low) the device turns off and reduces battery consumption to 0.1µA (typ.).
The LP5952 also features internal protection against over-temperature, over-current and under-voltage
conditions.
Performance is specified for a -40°C to 125°C junction temperature range.
The device is available in a tiny 5-bump micro SMD and a 6-pin Chip On Lead LLP package, lead free.
The device is available in fixed output voltages in the range of 0.5V to 2.0V. For availability, please contact your
local NSC sales office.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2008, Texas Instruments Incorporated