English
Language : 

LP5560 Datasheet, PDF (1/29 Pages) Texas Instruments – LP5560 Programmable LED Driver With Single-Wire Interface
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LP5560
SNVS873D – AUGUST 2012 – REVISED JUNE 2016
LP5560 Programmable LED Driver With Single-Wire Interface
1 Features
•1 Wide Input-Voltage Range: 2.7 V to 5.5 V
• Adjustable Output Current: 2.8 mA to 19.5 mA
• Programmable Blinking Sequence with Current
Rise and Fall Time Control
• Default Blinking Sequence for Simple Systems
without Programming Capabilities
• Single-Wire Interface
• Constant Current High Side Output Driver
• Very Low Headroom Voltage (40 mV Typical)
• Ultra-Small Solution Size – No External
Components
2 Applications
• Indicator LEDs in Cell Phones and Other Portable
Devices
• Card Readers
• Fuel Dispensers
• Pedometers
• Electronic Access Control
• Where Simple Feedback is Needed
3 Description
The LP5560 is a programmable LED driver that can
generate variety of blinking sequences with up to
three pulses of different length per sequence. Blinking
sequences can be programmed through a single-wire
interface. Programmable parameters include on and
off times as well as rise and fall times. Default
sequence is programmed into the LP5560 to enable
the use of device in simple systems without
programming capabilities.
Very low headroom voltage eliminates the need for a
boost converter. Indicator LEDs can be driven directly
from the battery. Small package size combined with
zero external components minimizes the solution
size.
LP5560 is available in TI’s tiny 4-pin DSBGA package
with 0.4-mm pitch.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LP5560
DSBGA (4)
0.886 mm × 0.886 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application
VDD
LED
+
-
LP5560
CTRL
GND
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.