LMZ13608_14 Datasheet, PDF (1/30 Pages) Texas Instruments – 8A SIMPLE SWITCHER® Power Module with 36V Maximum Input Voltage

LMZ13608
www.ti.com
SNVS710D – MARCH 2011 – REVISED SEPTEMBER 2011
LMZ13608 8A SIMPLE SWITCHER^® Power Module with 36V Maximum Input Voltage
Check for Samples: LMZ13608
FEATURES
1
•23 Integrated Shielded Inductor
• Simple PCB Layout
• Fixed Switching Frequency (350 kHz)
• Flexible Startup Sequencing Using External
Soft-start, Tracking and Precision Enable
• Protection Against Inrush Currents and Faults
Such as Input UVLO and Output Short Circuit
• – 40°C to 125°C Junction Temperature Range
• Single Exposed Pad and Standard Pinout for
Easy Mounting and Manufacturing
• Fully Enabled for WEBENCH^® Power Designer
• Pin Compatible with LMZ22010/08,
LMZ12010/08, LMZ23610/08/06H, and
LMZ13610/06H
APPLICATIONS
• Point of Load Conversions from 12V and 24V
Input Rail
• Time Critical Projects
• Space Constrained / High Thermal
Requirement Applications
• Negative Output Voltage Applications (See AN-
2027, literature number SNVA425)
ELECTRICAL SPECIFICATIONS
• 40W Maximum Total Output Power
• Up to 8A Output Current
• Input Voltage Range 6V to 36V
• Output Voltage Range 0.8V to 6V
• Efficiency up to 92%
DESCRIPTION
The LMZ13608 SIMPLE SWITCHER power module
is an easy-to-use step-down DC-DC solution capable
of driving up to 8A load. The LMZ13608 is available
in an innovative package that enhances thermal
performance and allows for hand or machine
soldering.
The LMZ13608 can accept an input voltage rail
between 6V and 36V and deliver an adjustable and
highly accurate output voltage as low as 0.8V. The
LMZ13608 only requires two external resistors and
three external capacitors to complete the power
solution. The LMZ13608 is a reliable and robust
design with the following protection features: thermal
shutdown, input under-voltage lockout, output over-
voltage protection, short-circuit protection, output
current limit, and allows startup into a pre-biased
output.
PERFORMANCE BENEFITS
• High Efficiency Reduces System Heat
Generation
• Low Radiated Emissions (EMI) Complies with
EN55022 Class B Standard
– EN 55022:2006, +A1:2007, FCC Part 15
Subpart B, Tested on Evaluation Board with
EMI Configuration
• Only 7 External Components
• Low Output Voltage Ripple
• No External Heat Sink Required
15 x 17.79 x 5.9 mm (0.59 x 0.7 x 0.232 in)
θ_JA = 9.9ºC/W, θ_JC = 1.0ºC/W
θ_JA measured on a 75mm x 90mm four
layer PCB.
Figure 1. Easy to use 11 pin package
PFM 11 Pin Package
RoHS Compliant
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SIMPLE SWITCHER, WEBENCH are registered trademarks of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated