LMX9830 Datasheet, PDF (1/56 Pages) National Semiconductor (TI) – BluetoothTM Serial Port Module

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LMX9830
SNOSAU0C – MAY 2008 – REVISED JUNE 2015
LMX9830 Bluetooth® Serial Port Module
1 Features
•1 Compliant With the Bluetooth^® 2.0 Core
Specification
– Qualified Design ID (PRD 2.0): B012364
• Input Sensitivity Better than –80 dBm
• Class 2 Operation
• Low Power Consumption
• High Integration:
– Implemented in 0.18-μm CMOS Technology
– RF Includes Antenna Filter and Switch On-
Chip
2 Applications
• Personal Digital Assistants
• POS Terminals
• Data Logging Systems
• Audio Gateway Applications
• Telemedicine/Medical, Industrial and Scientific
3 Description
The Texas Instruments LMX9830 Bluetooth Serial
Port module is a highly integrated Bluetooth 2.0
baseband controller and 2.4-GHz radio, combined to
form a complete small form factor (6.1 mm × 9.1 mm
× 1.2 mm) Bluetooth node.
All hardware and firmware is included to provide a
complete solution from antenna through the complete
lower and upper layers of the Bluetooth stack, up to
the application including the Generic Access Profile
(GAP), the Service Discovery Application Profile
(SDAP), and the Serial Port Profile (SPP). The
module includes a configurable service database to
fulfill service requests for additional profiles on the
host. Moreover, the LMX9830 is prequalified as a
Bluetooth Integrated Component. Conformance
testing through the Bluetooth qualification program.
The LMX9830 enables a short time to market after
system integration by ensuring a high probability of
compliance and interoperability.
Based on TI's CompactRISC 16-bit processor
architecture and Digital Smart Radio technology, the
LMX9830 is optimized to handle the data and link
management processing requirements of a Bluetooth
node.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LMX9830
NFBGA (60)
9.00 mm × 6.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Block Diagram
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.