LMV722-Q1 Datasheet, PDF (1/25 Pages) Texas Instruments – 10-MHz Low-Noise, Low-Voltage Operational Amplifier

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
LMV722-Q1
SLOS969 – JUNE 2017
LMV722-Q1 10-MHz Low-Noise, Low-Voltage Operational Amplifier
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Ambient Operating Temperature:
–40°C to +125°C
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C1
• Power-Supply Voltage Range: 2.2 V to 5.5 V
• Low Supply Current: 905 µA/Amplifier at 2.2 V
• High Unity-Gain Bandwidth: 10 MHz
• Rail-to-Rail Output Swing
– 600-Ω Load: 120 mV From Either Rail at 2.2 V
– 2-kΩ Load: 50 mV From Either Rail at 2.2 V
• Input Common-Mode Voltage Range Includes
Ground
• Input Voltage Noise: 10.5 nV/√Hz at f = 1 kHz
2 Applications
• Infotainment
• Engine Control Unit
• Automotive Lighting
• Audio Signal Path
3 Description
The LMV722-Q1 device is a low-noise, low-voltage
operational amplifier (op amp) that can be designed
into a wide range of applications. The LMV722-Q1
has a unity-gain bandwidth of 10 MHz, slew rate of
5.25 V/µs, and good voltage and current noise
performance.
The LMV722-Q1 is designed to provide optimal
performance in low-voltage and low-noise systems
such audio signal path or motor control applications.
The device provides rail-to-rail output swing into
heavy loads. The input common-mode voltage range
includes ground and the maximum input offset
voltage is 3.5 mV (over recommended temperature
range) for the device. The capacitive load capability is
also good at low supply voltages. The operating
range is from 2.2 V to 5.5 V.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LMV722-Q1
VSSOP
3.00 mm × 4.90 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
IN−
−
IN+
+
OUT
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.