English
Language : 

LMP8646 Datasheet, PDF (1/23 Pages) Texas Instruments – Precision Current Limiter
LMP8646
February 1, 2012
Precision Current Limiter
General Description
The LMP8646 is a precision current limiter used to improve
the current limit accuracy of any switching or linear regulator
with an available feedback node.
The LMP8646 accepts input signals with a common mode
voltage ranging from -2V to 76V. It has a variable gain which
is used to adjust the sense current. The gain is configured
with a single external resistor, RG, providing a high level of
flexibility and accuracy up to 2%. The adjustable bandwidth,
which allows the device to be used with a variety of applica-
tions, is configurable with a single external capacitor in par-
allel with RG. In addition, the output is buffered in order to
provide a low output impedance.
The LMP8646 is an ideal choice for industrial, automotive,
telecommunications, and consumer applications where cir-
cuit protection and improved precision systems are required.
The LMP8646 is available in a 6-pin TSOT package and can
operate at temperature range of −40°C to 125°C.
Applications
■ High-side and low-side current limit
■ Circuit fault protection
■ Battery and supercap charging
■ LED constant current drive
■ Power management
Features
■ Provides circuit protection and current limiting
■ Single supply operation
■ -2V to +76V common mode voltage range
■ Variable gain set by external resistor
■ Adjustable bandwidth set by external capacitor
■ Buffered output
■ 3% output accuracy achievable at VSENSE = 100 mV
Key Specifications
■ Supply voltage range
■ Output current (source)
■ Gain accuracy
■ Transconductance
■ Offset
■ Quiescent current
■ Input bias
■ PSRR
■ CMRR
■ Temperature range
■ 6-Pin TSOT Package
2.7V to 12V
0 to 5 mA
2.0% (max)
200 µA/V
±1 mV (max)
380 µA
12 µA (typ)
85 dB
95 dB
−40°C to 125°C
Typical Application
LMP™ is a trademark of National Semiconductor Corporation.
© 2012 Texas Instruments Incorporated 301235 SNOSC63
30123534
www.ti.com