LMK60E2-150M00 Datasheet, PDF (1/22 Pages) Texas Instruments – High-Performance Low Jitter Oscillator

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LMK60E2-150M00
LMK60E2-156M25, LMK60E0-156257
SNAS687A – JUNE 2016 – REVISED AUGUST 2016
LMK60XX High-Performance Low Jitter Oscillator
1 Features
•1 Low Noise, High Performance
– Jitter: 150 fs RMS typical Fout > 100 MHz
– PSRR: –60 dBc, Robust Supply Noise
Immunity
• Supported Output Format
– LVPECL and LVDS up to 800 MHz
– HCSL up to 400 MHz
• Total Frequency Tolerance of ± 50 ppm
(LMK60X2) and ± 25 ppm (LMK60X0)
• 3.3 V Operating Voltage
• Industrial Temperature Range (–40ºC to +85ºC)
• 7 mm x 5 mm 6-pin Package that is Pin-
compatible with Industry Standard 7050 XO
Package
2 Applications
• High-Performance Replacement for Crystal-,
SAW-, or Silicon-based Oscillators
• Switches, Routers, Network Line Cards, Base
Band Units (BBU), Servers, Storage/SAN
• Test and Measurement
• Medical Imaging
• FPGA, Processor Attach
3 Description
The LMK60XX is a low jitter oscillator that generates
a commonly used reference clock. The device is pre-
programmed in factory to support any reference clock
frequency; supported output formats are LVPECL and
LVDS up to 800 MHz, and HCSL up to 400 MHz.
Internal power conditioning provide excellent power
supply ripple rejection (PSRR), reducing the cost and
complexity of the power delivery network. The device
operates from a single 3.3 V ± 5% supply.
Device Information⁽¹⁾
PART
NUMBER
OUTPUT
FREQ (MHz)
AND
FORMAT
TOTAL
FREQ
STABILITY
(ppm)
PACKAGE
BODY
SIZE
(NOM)
LMK60E2-
150M00
150 LVPECL
± 50
LMK60E2- 156.25
156M25 LVPECL
± 50
6-pin QFM
7.0 mm x
5.0 mm
LMK60E0- 156.257
156257
LVPECL
± 25
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Pinout
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.