LM4674_14 Datasheet, PDF (1/27 Pages) Texas Instruments – Filterless 2.5W Stereo Class D Audio Power Amplifier

LM4674
www.ti.com
SNAS344D – DECEMBER 2005 – REVISED JULY 2008
LM4674
Filterless 2.5W Stereo Class D Audio Power
Amplifier
Check for Samples: LM4674
FEATURES
1
•2 Output Short Circuit Protection
• Stereo Class D Operation
• No Output Filter Required
• Logic Selectable Gain
• Independent Shutdown Control
• Minimum External Components
• Click and Pop Suppression
• Micro-Power Shutdown
• Available in Space-Saving 2mm x 2mm x
0.6mm DSBGA, and 4mm x 4mm x 0.8mm
WQFN Packages
APPLICATIONS
• Mobile Phones
• PDAs
• Laptops
KEY SPECIFICATIONS
• Efficiency at 3.6V, 100mW into 8Ω: 80% (typ)
• Efficiency at 3.6V, 500mW into 8Ω: 85% (typ)
• Efficiency at 5V, 1W into 8Ω: 85% (typ)
• Quiescent Power Supply Current
at 3.6V supply: 4mA
• Power Output at V_DD = 5V,
R_L = 4Ω, THD ≤ 10%: 2.5 W (typ)
• Shutdown Current: 0.03μA (typ)
DESCRIPTION
The LM4674 is a single supply, high efficiency,
2.5W/channel, filterless switching audio amplifier. A
low noise PWM architecture eliminates the output
filter, reducing external component count, board area
consumption, system cost, and simplifying design.
The LM4674 is designed to meet the demands of
mobile phones and other portable communication
devices. Operating from a single 5V supply, the
device is capable of delivering 2.5W/channel of
continuous output power to a 4Ω load with less than
10% THD+N. Flexible power supply requirements
allow operation from 2.4V to 5.5V.
The LM4674 features high efficiency compared to
conventional Class AB amplifiers. When driving an
8Ω speaker from a 3.6V supply, the device features
85% efficiency at P_O = 500mW. Four gain options are
pin selectable through the G0 and G1 pins.
Output short circuit protection prevents the device
from being damaged during fault conditions. Superior
click and pop suppression eliminates audible
transients on power-up/down and during shutdown.
Independent left/right shutdown control maximizes
power savings in mixed mono/stereo applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2008, Texas Instruments Incorporated