|
LM393-MIL Datasheet, PDF (1/14 Pages) Texas Instruments – Dual Differential Comparators | |||
|
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
LM393-MIL Dual Differential Comparators
LM393-MIL
SLCS162 â JUNE 2017
1 Features
â¢1 Single-Supply or Dual Supplies
⢠Wide Range of Supply Voltage
â Maximum Rating: 2 V to 36 V
â Tested to 30 V
⢠Low Supply-Current Drain Independent of Supply
Voltage: 0.4 mA (Typical) Per Comparator
⢠Low Input Bias Current: 25 nA (Typical)
⢠Low Input Offset Voltage: 2 mV (Typical)
⢠Common-Mode Input Voltage Range Includes
Ground
⢠Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V
⢠Low Output Saturation Voltage
⢠Output Compatible with TTL, MOS, and CMOS
⢠On Products Compliant to MIL-PRF-38535, All
Parameters are Tested Unless Otherwise Noted.
On All Other Products, Production Processing
does not Necessarily Include Testing of All
Parameters.
2 Applications
⢠Chemical or Gas Sensor
⢠Desktop PC
⢠Motor Control: AC Induction
⢠Weigh Scale
3 Description
These devices consist of two independent voltage
comparators that are designed to operate from a
single power supply over a wide range of voltages.
Operation from dual supplies also is possible as long
as the difference between the two supplies is 2 V to
36 V, and VCC is at least 1.5 V more positive than the
input common-mode voltage. Current drain is
independent of the supply voltage. The outputs can
be connected to other open-collector outputs to
achieve wired-AND relationships.
The LM393-MIL device is characterized for operation
from 0°C to 70°C.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LM393-MILD
SOIC (8)
4.90 mm à 6.00 mm
LM393-MILDGK
VSSOP (8)
3.00 mm x 5.00 mm
LM393-MILP
PDIP (8)
9.50 mm à 6.30 mm
LM393-MILPS
SO (8)
6.20 mm x 7.90 mm
LM393-MILPW
TSSOP (8)
6.40 mm x 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
IN+
OUT
INâ
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |