LM2940-EP Datasheet, PDF (1/6 Pages) Texas Instruments – DUAL OPERATIONAL AMPLIFIER

LM2904ĆEP
DUAL OPERATIONAL AMPLIFIER
D Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of
−40°C to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree^†
D ESD Protection Exceeds 500 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Low Supply-Current Drain Independent of
Supply Voltage . . . 0.7 mA Typ
† _{Component qualification in accordance with JEDEC and industry}
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
SLOS448 – OCTOBER 2004
D Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
D Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
− Non-V Devices . . . ±26 V
− V-Suffix Devices . . . ±32 V
D Low Input Bias and Offset Parameters:
− Input Offset Voltage . . . 3 mV Typ
− Input Offset Current . . . 2 nA Typ
− Input Bias Current . . . 20 nA Typ
D Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
D Internal Frequency Compensation
D OR PW PACKAGE
(TOP VIEW)
1OUT 1
1IN− 2
1IN+ 3
GND 4
8 V_CC
7 2OUT
6 2IN−
5 2IN+
description/ordering information
This device consists of two independent, high-gain, frequency-compensated operational amplifiers designed
to operate from a single supply over a wide range of voltages. Operation from split supplies is possible as long
as the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffix devices), and V_CC is at least
1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the
magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational
amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,
these devices can be operated directly from the standard 5-V supply used in digital systems and easily provide
the required interface electronics without additional ±5-V supplies.
ORDERING INFORMATION
TA
VIOmax
AT 25°C
MAX VCC
PACKAGE^‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
7 mV
26 V SOIC (D)
Tape and reel LM2904QDREP
2904EP
7 mV
26 V TSSOP (PW) Tape and reel LM2904QPWREP
2904EP
−40°C to 125°C
7 mV
7 mV
32 V
32 V
SOIC (D)
TSSOP (PW)
Tape and reel
Tape and reel
LM2904VQDREP
LM2904VQPWREP
2904VEP
2904VEP
2 mV
32 V SOIC (D)
Tape and reel LM2904AVQDREP 2904AVE
2 mV
32 V TSSOP (PW) Tape and reel LM2904AVQPWREP 2904AVE
‡ _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at}
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1