English
Language : 

LM2936Q Datasheet, PDF (1/17 Pages) Texas Instruments – Ultra-Low Quiescent Current LDO Voltage Regulator
LM2936Q
May 17, 2012
Ultra-Low Quiescent Current LDO Voltage Regulator
General Description
The LM2936Q ultra-low quiescent current regulator features
low dropout voltage and low current in the standby mode. With
less than 15 μA quiescent current at a 100 μA load, the
LM2936Q is ideally suited for automotive and other battery
operated systems. The LM2936Q retains all of the features
that are common to low dropout regulators including a low
dropout PNP pass device, short circuit protection, reverse
battery protection, and thermal shutdown. The LM2936Q has
a 40V maximum operating voltage limit, a −40°C to +125°C
operating temperature range, and ±3% output voltage toler-
ance over the entire output current, input voltage, and tem-
perature range. The LM2936Q is available in a SO-8
package, SOT-223 surface mount package and TO-252 sur-
face mount package.
Features
■ AEC-Q100 Grade 1 Qualified (-40°C to 125°C)
■ Ultra low quiescent current (IQ ≤ 15 μA for IO = 100 μA)
■ Fixed 3.0V, 3.3V or 5.0V with 50 mA output
■ ±2% Initial output tolerance
■ ±3% Output tolerance over line, load, and temperature
■ Dropout voltage typically 200 mV @ IO = 50 mA
■ Reverse battery protection
■ −50V reverse transient protection
■ Internal short circuit current limit
■ Internal thermal shutdown protection
■ 40V operating voltage limit
■ 60V operating voltage limit for LM2936HV
■ Shutdown pin available with the LM2936BM package
Typical Application
* Required if regulator is located more than 2″ from power supply filter capacitor.
30131901
** Required for stability. See Electrical Characteristics for required values. Must be rated over intended operating temperature range. Effective series resis-
tance (ESR) is critical, see curve. Locate capacitor as close as possible to the regulator output and ground pins. Capacitance may be increased without
bound.
© 2012 Texas Instruments Incorporated 301319 SNVS684B
www.ti.com