LM2661MX_NOPB Datasheet, PDF (1/20 Pages) Texas Instruments – LM2660 Switched Capacitor Voltage Converter

LM2660
www.ti.com
SNVS135D – SEPTEMBER 1999 – REVISED MAY 2013
LM2660 Switched Capacitor Voltage Converter
Check for Samples: LM2660
FEATURES
1
•2 Inverts or Doubles Input Supply Voltage
• Narrow SO-8 and Mini SO-8 Package
• 6.5Ω Typical Output Resistance
• 88% Typical Conversion Efficiency at 100 mA
• Selectable Oscillator Frequency: 10 kHz/80
kHz
• Optional External Oscillator Input
APPLICATIONS
• Laptop Computers
• Cellular Phones
• Medical Instruments
• Operational Amplifier Power Supplies
• Interface Power Supplies
• Handheld Instruments
DESCRIPTION
The LM2660 CMOS charge-pump voltage converter
is a versatile unregulated switched capacitor inverter
or doubler. Operating from a wide 1.5V to 5.5V
supply voltage, the LM2660 uses two low-cost
capacitors to provide 100 mA of output current
without the cost, size and EMI related to inductor-
based converters. With an operating current of only
120 µA and operating efficiency greater than 90% at
most loads, the LM2660 provides ideal performance
for battery-powered systems. LM2660 devices can be
operated directly in parallel to lower output
impedance, thus providing more current at a given
voltage.
The FC (frequency control) pin selects between a
nominal 10 kHz or 80 kHz oscillator frequency. The
oscillator frequency can be lowered by adding an
external capacitor to the OSC pin. Also, the OSC pin
may be used to drive the LM2660 with an external
clock up to 150 kHz. Through these methods, output
ripple frequency and harmonics may be controlled.
Additionally, the LM2660 may be configured to divide
a positive input voltage precisely in half. In this mode,
input voltages as high as 11V may be used.
Basic Application Circuits
Voltage Inverter
Positive Voltage Doubler
Splitting V_IN in Half
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated