LM13700_16 Datasheet, PDF (1/37 Pages) Texas Instruments – Dual Operational Transconductance Amplifiers

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LM13700
SNOSBW2F – NOVEMBER 1999 – REVISED NOVEMBER 2015
LM13700 Dual Operational Transconductance Amplifiers
With Linearizing Diodes and Buffers
1 Features
•1 g_m Adjustable Over 6 Decades
• Excellent g_m Linearity
• Excellent Matching Between Amplifiers
• Linearizing Diodes for reduced output distortion
• High Impedance Buffers
• High Output Signal-to-Noise Ratio
2 Applications
• Current-Controlled Amplifiers
• Stereo Audio Amplifiers
• Current-Controlled Impedances
• Current-Controlled Filters
• Current-Controlled Oscillators
• Multiplexers
• Timers
• Sample-and-Hold Circuits
3 Description
The LM13700 series consists of two current-
controlled transconductance amplifiers, each with
differential inputs and a push-pull output. The two
amplifiers share common supplies but otherwise
operate independently. Linearizing diodes are
provided at the inputs to reduce distortion and allow
higher input levels. The result is a 10-dB signal-to-
noise improvement referenced to 0.5 percent THD.
High impedance buffers are provided which are
especially designed to complement the dynamic
range of the amplifiers. The output buffers of the
LM13700 differ from those of the LM13600 in that
their input bias currents (and thus their output DC
levels) are independent of I_ABC. This may result in
performance superior to that of the LM13600 in audio
applications.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LM13700
SOIC (16)
PDIP (16)
3.91 mm × 9.90 mm
6.35 mm × 19.304 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Connection Diagram
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.