LM117HVQML_17 Datasheet, PDF (1/30 Pages) Texas Instruments – 3-Terminal Adjustable Regulator

LM117HVQML, LM117HVQML-SP
www.ti.com
SNVS357D – MARCH 2006 – REVISED APRIL 2013
LM117HVQML 3-Terminal Adjustable Regulator
Check for Samples: LM117HVQML, LM117HVQML-SP
FEATURES
1
•2 Available with Radiation Ensured
– Total Ionizing Dose 100 krad(Si)
– Low Dose Rate Qualified 100 krad(Si)
• Adjustable Output down to 1.2V
• Specified 0.5A or 1.5A Output Current
• Line Regulation Typically 0.01%/V
• Load Regulation Typically 0.1%
• Current Limit Constant with Temperature
• Eliminates the Need to Stock Many Voltages
• 80 dB Ripple Rejection
• Output is Short-Circuit Protected
DESCRIPTION
The LM117HV are adjustable 3-terminal positive
voltage regulators capable of supplying either 0.5A or
1.5A over a 1.2V to 57V output range. They are
exceptionally easy to use and require only two
external resistors to set the output voltage. Further,
both line and load regulation are better than standard
fixed regulators.
In addition to higher performance than fixed
regulators, the LM117HV series offers full overload
protection available only in IC's. Included on the chip
are current limit, thermal overload protection and safe
area protection. All overload protection circuitry
remains fully functional even if the adjustment
terminal is disconnected.
Normally, no capacitors are needed unless the device
is situated more than 6 inches from the input filter
capacitors in which case an input bypass is needed.
An optional output capacitor can be added to improve
transient response. The adjustment terminal can be
bypassed to achieve very high ripple rejections ratios
which are difficult to achieve with standard 3-terminal
regulators.
Besides replacing fixed regulators, the LM117HV is
useful in a wide variety of other applications. Since
the regulator is “floating” and sees only the input-to-
output differential voltage, supplies of several
hundred volts can be regulated as long as the
maximum input to output differential is not exceeded,
i.e. do not short the output to ground.
Also, it makes an especially simple adjustable
switching regulator, a programmable output regulator,
or by connecting a fixed resistor between the
adjustment and output, the LM117HV can be used as
a precision current regulator. Supplies with electronic
shutdown can be achieved by clamping the
adjustment terminal to ground which programs the
output to 1.2V where most loads draw little current.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated