LM107QML_13 Datasheet, PDF (1/6 Pages) Texas Instruments – Operational Amplifier

OBSOLETE
LM107QML
www.ti.com
SNOSAP0B – MAY 2005 – REVISED APRIL 2013
LM107QML Operational Amplifier
Check for Samples: LM107QML
FEATURES
1
•2 Offset Voltage 3 mV Maximum over
Temperature
• Input Current 100 nA Maximum over
Temperature
• Offset Current 20 nA Maximum over
Temperature
DESCRIPTION
The LM107 is a complete, general purpose
operational amplifier, with the necessary frequency
compensation built into the chip. Advanced
processing techniques make the input currents a
factor of ten lower than industry standards such as
the 709. Yet, they are a direct, plug-in replacement
for the 709, LM101A and 741. The LM107 offers the
features of the LM101A, which makes its application
nearly foolproof. In addition, the device provides
better accuracy and lower noise in high impedance
circuitry. The low input currents also make it
particularly well suited for long interval integrators or
timers, sample and hold circuits and low frequency
waveform generators. Further, replacing circuits
where matched transistor pairs buffer the inputs of
conventional IC op amps, it can give lower offset
voltage and drift at a lower cost.
Connection Diagram
1
8
7 ^V+
INPUTS
-
2
+
3
4
V^-
6 OUTPUT
5
Figure 1. Metal Can Package (Top View)
See Package Number H08C
Note: Pin 4 connected to case.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated