ISO7340-Q1_16 Datasheet, PDF (1/35 Pages) Texas Instruments – Robust EMC, Low-Power, Quad-Channel Reinforced Digital Isolators

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
ISO7340-Q1, ISO7341-Q1, ISO7342-Q1
SLLSEK5A – JULY 2015 – REVISED AUGUST 2016
ISO734x-Q1 Robust EMC, Low-Power, Quad-Channel Reinforced Digital Isolators
1 Features
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
– Device HBM Classification Level 3A
– Device CDM Classification Level C6
• Signaling Rate: 25 Mbps
• Integrated Noise Filter on the Inputs
• Default Output High and Low Options
• Low Power Consumption, Typical I_CC per Channel
at 1 Mbps:
– ISO7340-Q1: 0.9 mA (5-V Supplies),
0.7 mA (3.3-V Supplies)
– ISO7341-Q1: 1.2 mA (5-V Supplies),
0.9 mA (3.3-V Supplies)
– ISO7342-Q1: 1.3 mA (5-V Supplies),
0.9 mA (3.3-V Supplies)
• Low Propagation Delay: 31 ns
Typical (5-V Supplies)
• 3.3-V and 5-V Level Translation
• 70-KV/μs Transient Immunity,
Typical (5-V Supplies)
• Robust Electromagnetic Compatibility (EMC)
– System-level ESD, EFT, and Surge Immunity
– Low Emissions
• Operates from 3.3-V and 5-V Supplies
• Wide-Body SOIC-16 Package
• Safety-Related Certifications:
– 4242-V_PK Basic Isolation per DIN V VDE V
0884-10 and DIN EN 61010-1
– 3-KV_RMS Isolation for 1 minute per UL 1577
– CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment
Standards
– GB4943.1-2011 CQC Certified
2 Applications
• Optocoupler Replacement in:
– Industrial Fieldbus
– Profibus
– Modbus
– DeviceNet^TM Data Buses
– Servo Control Interface
– Motor Control
– Power Supplies
– Battery Packs
3 Description
The ISO734x-Q1 family of devices provides galvanic
isolation up to 3000 V_RMS for 1 minute per UL 1577
and 4242 V_PK per VDE V 0884-10. These devices
have four isolated channels comprised of logic input
and output buffers separated by a silicon dioxide
(SiO₂) insulation barrier.
The ISO7340-Q1 device has four channels in forward
direction, the ISO7341-Q1 device has three forward
and one reverse-direction channels, and the
ISO7342-Q1 device has two forward and two reverse-
direction channels. In case of input power or signal
loss, the default output is low for orderable part
numbers with suffix F and high for orderable part
numbers without suffix F. See the Device Functional
Modes section for further details.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE
ISO7340-Q1
ISO7341-Q1
SOIC (16)
10.30 mm × 7.50 mm
ISO7342-Q1
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
V_CCI
Isolation
Capacitor
V_CCO
INx
OUTx
ENx
GNDI
GNDO
V_CCI and GNDI are supply and ground
connections respectively for the input
channels.
V_CCO and GNDO are supply and ground
connections respectively for the output.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.