ISO7142CC-Q1 Datasheet, PDF (1/26 Pages) Texas Instruments – Small-Footprint and Low-Power Quad Channel Digital Isolator

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
ISO7142CC-Q1
SLLSER5 – DECEMBER 2015
ISO7142CC-Q1 4242-V_PK Small-Footprint and Low-Power Quad Channel Digital Isolator
1 Features
2 Applications
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
Range
– Device HBM Classification Level 3A
– Device CDM Classification Level C6
• Maximum Signaling Rate: 50 Mbps (with 5-V
Supplies)
• Robust Design With Integrated Noise Filter
• Low-Power Consumption, Typical I_CC per Channel
(With 3.3-V Supplies):
– 1.3 mA at 1 Mbps, 2.5 mA at 25 Mbps
• 50 kV/µs Transient Immunity, Typical
• Long Life with SiO₂ Isolation Barrier
• Operates From 2.7-V, 3.3-V and 5-V Supply
• 2.7-V to 5.5-V Level Translation
• Small QSOP-16 Package
• Safety and Regulatory Approvals
– 2500-V_RMS Isolation for 1 Minute per UL 1577
– 4242-V_PK Isolation per DIN V VDE V 0884-10
(VDE V 0884-10):2006-12
– CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment
Standards
– Planned CQC Certification per GB4943.1-2011
• General Purpose Isolation
• Industrial Automation
• Motor Control
• Solar Inverters
3 Description
The ISO7142CC-Q1 device provides galvanic
isolation up to 2500 V_RMS for 1 minute per UL 1577
and 4242-V_PK per VDE V 0884-10. The
ISO7142CC-Q1 is a quad-channel isolator with two
forward and two reverse-direction channels. This
device is capable of maximum data rate of 50 Mbps
with 5-V supplies and 40 Mbps with 3.3-V or 2.7-V
supplies. The ISO7142CC-Q1 device has integrated
filters on the inputs to support noise-prone
applications.
Each isolation channel has a logic input and output
buffer separated by a silicon dioxide (SiO₂) insulation
barrier. Used in conjunction with isolated power
supplies, this device prevents noise currents on a
data bus or other circuits from entering the local
ground and interfering with or damaging sensitive
circuitry. This device has TTL input thresholds and
can operate from 2.7-V, 3.3-V, and 5-V supplies.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
ISO7142CC-Q1
SSOP (16)
4.90 mm × 3.90 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
V_CCI
Isolation
Capacitor
V_CCO
INx
OUTx
ENx
GNDI
GNDO
V_CCI and GNDI are supply and ground connections respectively for the input channels.
V_CCO and GNDO are supply and ground connections respectively for the output channels.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.